Trackball cs-2-akdk
ash-dgx-ai·trackball-cs-2-akdk·controller-kicad/controller.kicad_pcb
About the Trackball cs-2-akdk PCB
Trackball cs-2-akdk is an open source PCB design by ash-dgx-ai, published on GitHub. It is a 2-layer board measuring 98 × 29 mm, with 23 components from 17 distinct parts.
Other key parts include the E73-2G4M08S1C and MCP73831. By type, the board carries 8 capacitors, 6 resistors, 3 connectors, 2 ICs, 2 diodes and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Reverse-engineered from the trackball-cs-2-akdk repository data (main-PCB controller footprint, case STL, ZMK akdkbt1` DTS, and the Auto-KDK README).
Reverse-engineered from the trackball-cs-2-akdk repository data (main-PCB controller footprint, case STL, ZMK akdkbt1` DTS, and the Auto-KDK README).
- Size: 98.0 x 29.0 mm - 2 layers, 1.6 mm thickness - All components are on the bottom side (the side opposite the conthrough pads). Order JLCPCB PCBA with Bottom side assembly. - Conthrough pads: 2 x 9, 1.27 mm pitch, 19.0 mm row spacing, on the top side.
Main components on the Trackball cs-2-akdk
Trackball cs-2-akdk bill of materials (BOM)
23 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E73-2G4M08S1C | E73-2G4M08S1C | U1 |
| 1 | MCP73831 | MCP73831_SOT-23-5 | U2 |
| 1 | C165948 USB-C | USB_C | J1 |
| 1 | C131337 Battery PH2 | JST_PH_2P | J2 |
| 1 | C202118 FFC 6P 0.5mm | FFC_6P | J3 |
| 1 | C97434 DPDT | SW_DPDT | SW1 |
| 1 | C2986031 Green | LED_0603_1608Metric | LED1 |
| 2 | SS14 | D_SMA | D1, D2 |
| 1 | 1UF 1uF | C_0603_1608Metric | C1 |
| 2 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C5 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C3 |
| 4 | 10UF 10uF | C_0603_1608Metric | C6, C7, C8, C9 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 6.2K 6.2k | R_0603_1608Metric | R3 |
| 1 | 2M | R_0603_1608Metric | R4 |
| 1 | 1M | R_0603_1608Metric | R5 |
| 1 | 1k | R_0603_1608Metric | R6 |
Trackball cs-2-akdk design files
The KiCad project lives in the ash-dgx-ai/trackball-cs-2-akdk repository on GitHub; these links point at the commit this page was built from.
Trackball cs-2-akdk: common questions
How big is the Trackball cs-2-akdk PCB?
The Trackball cs-2-akdk measures 98 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Trackball cs-2-akdk?
23 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Trackball cs-2-akdk design files?
From the ash-dgx-ai/trackball-cs-2-akdk repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Trackball cs-2-akdk design in my own project?
The repository has no license, so all rights stay with ash-dgx-ai. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k