Ice40 catears v1

asinghani·ice40-wearable·ice40_catears_board/ice40_catears_v1.kicad_pcb

Ice40 catears v1 PCB layout, top view — open source FPGA board by asinghani

About the Ice40 catears v1 PCB

Ice40 catears v1 is an open source FPGA PCB design by asinghani, published on GitHub. It is a 2-layer board measuring 65.7 × 54.6 mm, with 47 components from 23 distinct parts.

Its main chip is the ICE40UP5K-SG48ITR, from the FPGA family. Other key parts include the W25Q32JVSS, MIC5504-1.2YM5 and MIC5504-3.3YM5. By type, the board carries 17 capacitors, 14 resistors, 8 diodes, 4 ICs, 3 connectors and 1 battery holder.

It belongs with the wearables designs in this gallery.

From the project

iCE40 FPGA boards in wearable form-factors

This repo contains board designs (KiCad) for two iCE40 FPGA-based boards: one in a sewable form-factor and one in a cat-ear form factor.

This board is inspired by the Adafruit Flora and is meant to be sewn into clothing or accessories. It is shaped as a small circle and has all the components on the front side to allow it to sit flush against a flat surface. It includes the following features:

Ice40 catears v1, from the project README
From the project README

Main components on the Ice40 catears v1

Ice40 catears v1 bill of materials (BOM)

47 components, 23 distinct parts.

QtyPartRefs
1
W25Q32JVSS
U1
1
MIC5504-1.2YM5
U2
1
MIC5504-3.3YM5
U3
1
ICE40UP5K-SG48ITR
U4
1
BATT-R
J1
1
BATT-L
J2
1
Debug Header
J3
1
CR2032
BT1
1
WS2812-TOP
D1
1
WS2812-L2
D2
1
MBR130
D3
1
WS2812-R2
D4
1
WS2812-R1
D5
1
WS2812-L1
D6
1
WS2812-R3
D7
1
WS2812-L3
D8
11
100n
C1, C2, C7, C8, C9, C11, C13, C14 +3
4
1u
C3, C4, C5, C6
1
10u
C10
1
10n
C12
Show 3 more
QtyPartRefs
9
2K2
R1, R2, R7, R9, R10, R11, R12, R13 +1
4
10K
R3, R4, R5, R6
1
100R
R8

Ice40 catears v1 design files

The KiCad project lives in the asinghani/ice40-wearable repository on GitHub; these links point at the commit this page was built from.

Ice40 catears v1: common questions

What microcontroller does the Ice40 catears v1 use?

The Ice40 catears v1 is built around the ICE40UP5K-SG48ITR, from the FPGA family.

How big is the Ice40 catears v1 PCB?

The Ice40 catears v1 measures 65.7 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ice40 catears v1?

47 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ice40 catears v1 design files?

From the asinghani/ice40-wearable repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Ice40 catears v1 design in my own project?

The repository has no license, so all rights stay with asinghani. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ice40 catears v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in ice40-wearable

Similar boards