Ice40 wearable v1

asinghani·ice40-wearable·ice40_sewable_board/ice40_wearable_v1.kicad_pcb

Ice40 wearable v1 PCB layout, top view — open source FPGA board by asinghani

About the Ice40 wearable v1 PCB

Ice40 wearable v1 is an open source FPGA PCB design by asinghani, published on GitHub. It is a 2-layer board measuring 51.2 × 51.2 mm, with 61 components from 40 distinct parts.

Its main chip is the ICE40UP5K-SG48ITR, from the FPGA family. Other key parts include the MIC5504-1.2YM5, MIC5504-3.3YM5, W25Q32JVSS and USBLC6-2SC6. By type, the board carries 18 resistors, 16 connectors, 13 capacitors, 7 diodes, 5 ICs and 1 crystal.

It belongs with the wearables designs in this gallery.

From the project

iCE40 FPGA boards in wearable form-factors

This repo contains board designs (KiCad) for two iCE40 FPGA-based boards: one in a sewable form-factor and one in a cat-ear form factor.

This board is inspired by the Adafruit Flora and is meant to be sewn into clothing or accessories. It is shaped as a small circle and has all the components on the front side to allow it to sit flush against a flat surface. It includes the following features:

Ice40 wearable v1, from the project README
From the project README

Main components on the Ice40 wearable v1

Ice40 wearable v1 bill of materials (BOM)

61 components, 40 distinct parts.

QtyPartRefs
1
ICE40UP5K-SG48ITR
U1
1
MIC5504-1.2YM5
U2
1
MIC5504-3.3YM5
U3
1
W25Q32JVSS
U4
1
USBLC6-2SC6
U5
1
SIT2001BI-S2-33E-12.000000G
X1
1
SewingPad_0
J2
1
BATT
J3
1
SewingPad_1
J4
1
SewingPad_2
J5
1
SewingPad_3
J6
1
SewingPad_4
J7
1
SewingPad_5
J8
1
SewingPad_6
J9
1
SewingPad_7
J10
1
SewingPad_8
J11
1
SewingPad_9
J12
1
SewingPad_10
J13
1
SewingPad_11
J14
1
SewingPad_12
J15
Show 20 more
QtyPartRefs
1
SewingPad_13
J16
1
USB_C_Receptacle_USB2.0
J17
1
USER_BTN
SW1
3
MBR130
D1, D2, D6
1
LED_PWR
D3
1
WS2812
D4
1
LED_DONE
D5
1
LED_USER
D7
5
1u
C1, C2, C5, C6, C15
6
100n
C3, C4, C9, C12, C13, C16
1
10u
C11
1
10n
C14
5
10K
R1, R2, R4, R5, R6
3
1K
R3, R10, R18
3
2K2
R7, R8, R9
1
1M
R11
1
100R
R12
2
5K1
R13, R14
1
1K5
R15
2
22R
R16, R17

Ice40 wearable v1 design files

The KiCad project lives in the asinghani/ice40-wearable repository on GitHub; these links point at the commit this page was built from.

Ice40 wearable v1: common questions

What microcontroller does the Ice40 wearable v1 use?

The Ice40 wearable v1 is built around the ICE40UP5K-SG48ITR, from the FPGA family.

How big is the Ice40 wearable v1 PCB?

The Ice40 wearable v1 measures 51.2 × 51.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ice40 wearable v1?

61 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ice40 wearable v1 design files?

From the asinghani/ice40-wearable repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Ice40 wearable v1 design in my own project?

The repository has no license, so all rights stay with asinghani. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ice40 wearable v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in ice40-wearable

Similar boards