Servo Motor Tester
AsmitKumar321·10-DAYS-of-10-Projects-of-PCB-Design·Servo Motor Tester/Servo Motor Tester.kicad_pcb
About the Servo Motor Tester PCB
Servo Motor Tester is an open source PCB design by AsmitKumar321, published on GitHub. It is a 2-layer board measuring 28.8 × 28.3 mm, with 10 components from 10 distinct parts.
Other key parts include the NE555P. By type, the board carries 3 resistors, 2 connectors, 2 diodes, 1 IC and 1 capacitor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
DAY 08: 30A HOME AUTOMATION WITH ESP32 MCUP
Main components on the Servo Motor Tester
Servo Motor Tester bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | 100K | Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | LED | LED_D3.0mm | D2 |
| 1 | 22nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 3M3 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 56K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
Servo Motor Tester design files
The KiCad project lives in the AsmitKumar321/10-DAYS-of-10-Projects-of-PCB-Design repository on GitHub; these links point at the commit this page was built from.
Servo Motor Tester: common questions
How big is the Servo Motor Tester PCB?
The Servo Motor Tester measures 28.8 × 28.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Servo Motor Tester?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Servo Motor Tester design files?
From the AsmitKumar321/10-DAYS-of-10-Projects-of-PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Servo Motor Tester design in my own project?
The repository has no license, so all rights stay with AsmitKumar321. Use it as a reference, and ask the author before reusing the design.
More boards in 10-DAYS-of-10-Projects-of-PCB-Design
ESP32
30A HOME AUTOMATION WITH ESP32
AsmitKumar321
81.1 × 72.1 mm28 parts2LNo license1USB to UART converter
AsmitKumar321
30.5 × 16 mm19 parts2LNo license1Transformerless Power Supply
AsmitKumar321
55.5 × 38 mm18 parts2LNo license1DCmotorSpeedController
AsmitKumar321
62 × 33.5 mm15 parts2LNo license1Boost Converter V1
AsmitKumar321
46 × 21 mm13 parts2LNo license1ACtoDCconverter
AsmitKumar321
39 × 32.5 mm10 parts2LNo license1DRV8833MotorDriver
AsmitKumar321
21.5 × 16.3 mm8 parts2LNo license1
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k