USB to UART converter
AsmitKumar321·10-DAYS-of-10-Projects-of-PCB-Design·USB to UART converter/USB to UART converter.kicad_pcb
About the USB to UART converter PCB
USB to UART converter is an open source PCB design by AsmitKumar321, published on GitHub. It is a 2-layer board measuring 30.5 × 16 mm, with 19 components from 9 distinct parts.
Other key parts include the CP2102N-Axx-xQFN28. By type, the board carries 7 resistors, 5 diodes, 4 capacitors, 2 connectors and 1 IC.
It belongs with the usb & debug tools, robotics & motion and power & battery designs in this gallery.
From the project
DAY 08: 30A HOME AUTOMATION WITH ESP32 MCUP
Main components on the USB to UART converter
USB to UART converter bill of materials (BOM)
19 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 2 | LED | LED_0201_0603Metric | D1, D2 |
| 3 | LESD5D5.0CT1G | TVS_LESD5D5.0CT1G | D3, D4, D5 |
| 4 | 100nF | C_0201_0603Metric | C1, C2, C3, C4 |
| 2 | 5.1K | R_0201_0603Metric | R1, R2 |
| 1 | 10K | R_0201_0603Metric | R3 |
| 4 | 1K | R_0201_0603Metric | R4, R5, R6, R7 |
USB to UART converter design files
The KiCad project lives in the AsmitKumar321/10-DAYS-of-10-Projects-of-PCB-Design repository on GitHub; these links point at the commit this page was built from.
USB to UART converter: common questions
How big is the USB to UART converter PCB?
The USB to UART converter measures 30.5 × 16 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB to UART converter?
19 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB to UART converter design files?
From the AsmitKumar321/10-DAYS-of-10-Projects-of-PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB to UART converter design in my own project?
The repository has no license, so all rights stay with AsmitKumar321. Use it as a reference, and ask the author before reusing the design.
More boards in 10-DAYS-of-10-Projects-of-PCB-Design
ESP32
30A HOME AUTOMATION WITH ESP32
AsmitKumar321
81.1 × 72.1 mm28 parts2LNo license1Transformerless Power Supply
AsmitKumar321
55.5 × 38 mm18 parts2LNo license1DCmotorSpeedController
AsmitKumar321
62 × 33.5 mm15 parts2LNo license1Boost Converter V1
AsmitKumar321
46 × 21 mm13 parts2LNo license1ACtoDCconverter
AsmitKumar321
39 × 32.5 mm10 parts2LNo license1Servo Motor Tester
AsmitKumar321
28.8 × 28.3 mm10 parts2LNo license1DRV8833MotorDriver
AsmitKumar321
21.5 × 16.3 mm8 parts2LNo license1
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k