IQS550 captouch breakout
asmr-systems·development-boards·IQS550_captouch_breakout/IQS550_captouch_breakout.kicad_pcb
About the IQS550 captouch breakout
IQS550 captouch breakout is an open source PCB design by asmr-systems, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 31.5 × 22.2 mm, with 12 components from 9 distinct parts.
Other key parts include the IQS550BLQNR. By type, the board carries 6 capacitors, 3 connectors, 2 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
development boards
Main components on the IQS550 captouch breakout
IQS550 captouch breakout bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IQS550BLQNR | QFN50P700X700X60-49N-D | IC1 |
| 1 | 501951-0830 Conn_FFC_1x8_0.5mm_Vert_501951-0830 | Conn_FFC_1x8_0.5mm_Molex_5019510830 | J1 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | 501951-3210 Conn_FFC_1x32_0.5mm_Vert_501951-3210 | Conn_FFC_1x32_0.5mm_Molex_5019513210 | J3 |
| 1 | 0.1UF 1uF | C_0805_2012Metric | C1 |
| 2 | 1NF 100pF | C_0805_2012Metric | C2, C3 |
| 1 | 1NF 1uF | C_0805_2012Metric | C4 |
| 2 | 1NF 100nF | C_0805_2012Metric | C5, C6 |
| 2 | 23K 4.7k | R_0805_2012Metric | R1, R2 |
IQS550 captouch breakout design files
The KiCad project lives in the asmr-systems/development-boards repository on GitHub; these links point at the commit this page was built from.
IQS550 captouch breakout: common questions
How big is the IQS550 captouch breakout?
The IQS550 captouch breakout measures 31.5 × 22.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IQS550 captouch breakout?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IQS550 captouch breakout design files?
From the asmr-systems/development-boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IQS550 captouch breakout design in my own project?
Yes, under the terms of its CC0-1.0 license, which asmr-systems chose for the repository.
More boards in development-boards
Led matrix 8x32
asmr-systems
216 × 65.6 mm263 parts2LCC0-1.01Big One, Little One
asmr-systems
47.5 × 96 mm135 parts2LCC0-1.01At42qt148 captouch
asmr-systems
74.8 × 26.6 mm43 parts2LCC0-1.01Microchip SAM
Samd51j18a
asmr-systems
72.4 × 26.7 mm25 parts2LCC0-1.01Microchip SAM
Samd21g17d
asmr-systems
46.5 × 26.9 mm23 parts2LCC0-1.01Microchip SAM
Samd10d13a
asmr-systems
54.6 × 24.1 mm17 parts2LCC0-1.01BH2227 breakout
asmr-systems
22.9 × 25.4 mm5 parts2LCC0-1.0109 padded high res tight
asmr-systems
227.9 × 67.9 mm5 parts2LCC0-1.01Fpc 1x16 conn breakout
asmr-systems
19.7 × 22 mm3 parts2LCC0-1.01High speed opamp sot-23-5 breakout
asmr-systems
14.2 × 9.4 mm3 parts2LCC0-1.01
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979