Samd21g17d
asmr-systems·development-boards·samd21g17d/samd21g17d.kicad_pcb
About the Samd21g17d PCB
Samd21g17d is an open source Microchip SAM PCB design by asmr-systems, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 46.5 × 26.9 mm, with 23 components from 15 distinct parts.
Its main chip is the LM324WDT, from the Microchip SAM family. Other key parts include the TL074CDT. By type, the board carries 10 capacitors, 5 resistors, 3 connectors, 2 ICs, 1 crystal and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
development boards
Main components on the Samd21g17d
Samd21g17d bill of materials (BOM)
23 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324WDT ATSAMD21G17D-A | TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TL074CDT NJM2866F33 | SOT-23-5 | U2 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105 | J1 |
| 2 | Conn_01x17_Female | PinHeader_1x17_P2.54mm_Vertical | J2, J3 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | FB-30Ohm | L_0603_1608Metric | L1 |
| 1 | 0.1UF 15pF | C_0402_1005Metric | C1 |
| 1 | 1NF 15pF | C_0402_1005Metric | C2 |
| 7 | 1NF 0.1uF | C_0402_1005Metric | C3, C5, C6, C7, C8, C9, C10 |
| 1 | 1NF 1.0uF | C_0402_1005Metric | C4 |
| 2 | 23K 5.1K | R_0402_1005Metric | R1, R2 |
| 1 | 39K 100 | R_0402_1005Metric | R3 |
| 1 | 39K 10K | R_0402_1005Metric | R4 |
| 1 | 56K 4.7K | R_0402_1005Metric | R5 |
Samd21g17d design files
The KiCad project lives in the asmr-systems/development-boards repository on GitHub; these links point at the commit this page was built from.
Samd21g17d: common questions
What microcontroller does the Samd21g17d use?
The Samd21g17d is built around the LM324WDT, from the Microchip SAM family.
How big is the Samd21g17d PCB?
The Samd21g17d measures 46.5 × 26.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Samd21g17d?
23 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Samd21g17d design files?
From the asmr-systems/development-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Samd21g17d design in my own project?
Yes, under the terms of its CC0-1.0 license, which asmr-systems chose for the repository.
Can I test firmware for the Samd21g17d without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in development-boards
Led matrix 8x32
asmr-systems
216 × 65.6 mm263 parts2LCC0-1.01Big One, Little One
asmr-systems
47.5 × 96 mm135 parts2LCC0-1.01At42qt148 captouch
asmr-systems
74.8 × 26.6 mm43 parts2LCC0-1.01Microchip SAM
Samd51j18a
asmr-systems
72.4 × 26.7 mm25 parts2LCC0-1.01Microchip SAM
Samd10d13a
asmr-systems
54.6 × 24.1 mm17 parts2LCC0-1.01IQS550 captouch breakout
asmr-systems
31.5 × 22.2 mm12 parts2LCC0-1.01BH2227 breakout
asmr-systems
22.9 × 25.4 mm5 parts2LCC0-1.0109 padded high res tight
asmr-systems
227.9 × 67.9 mm5 parts2LCC0-1.01Fpc 1x16 conn breakout
asmr-systems
19.7 × 22 mm3 parts2LCC0-1.01High speed opamp sot-23-5 breakout
asmr-systems
14.2 × 9.4 mm3 parts2LCC0-1.01
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416