Samd10d13a
asmr-systems·development-boards·samd10d13a/samd10d13a.kicad_pcb
About the Samd10d13a PCB
Samd10d13a is an open source Microchip SAM PCB design by asmr-systems, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 54.6 × 24.1 mm, with 17 components from 15 distinct parts.
Its main chip is the TL074CDT, from the Microchip SAM family. Other key parts include the LM324WDT. By type, the board carries 6 capacitors, 4 connectors, 3 resistors, 2 ICs, 1 switch and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
development boards
Main components on the Samd10d13a
Samd10d13a bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324WDT NJM2866F | SOT-23-5 | U1 |
| 1 | TL074CDT ATSAMD10D13A-SS | SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | USB_C_Receptacle_PWR_Only | USB_C_Receptacle_GCT_USB4105 | J1 |
| 1 | Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07_Male | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | SW_SPST | SW_Push_TL3305 | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C1 |
| 1 | 1NF 1.0uF | C_0402_1005Metric | C2 |
| 3 | 1NF 0.1uF | C_0402_1005Metric | C3, C5, C6 |
| 1 | 1NF 1uF | C_0402_1005Metric | C4 |
| 1 | 23K 100 | R_0402_1005Metric | R1 |
| 1 | 23K 10K | R_0402_1005Metric | R2 |
| 1 | 39K 4.7K | R_0402_1005Metric | R3 |
Samd10d13a design files
The KiCad project lives in the asmr-systems/development-boards repository on GitHub; these links point at the commit this page was built from.
Samd10d13a: common questions
What microcontroller does the Samd10d13a use?
The Samd10d13a is built around the TL074CDT, from the Microchip SAM family.
How big is the Samd10d13a PCB?
The Samd10d13a measures 54.6 × 24.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Samd10d13a?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Samd10d13a design files?
From the asmr-systems/development-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Samd10d13a design in my own project?
Yes, under the terms of its CC0-1.0 license, which asmr-systems chose for the repository.
Can I test firmware for the Samd10d13a without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in development-boards
Led matrix 8x32
asmr-systems
216 × 65.6 mm263 parts2LCC0-1.01Big One, Little One
asmr-systems
47.5 × 96 mm135 parts2LCC0-1.01At42qt148 captouch
asmr-systems
74.8 × 26.6 mm43 parts2LCC0-1.01Microchip SAM
Samd51j18a
asmr-systems
72.4 × 26.7 mm25 parts2LCC0-1.01Microchip SAM
Samd21g17d
asmr-systems
46.5 × 26.9 mm23 parts2LCC0-1.01IQS550 captouch breakout
asmr-systems
31.5 × 22.2 mm12 parts2LCC0-1.01BH2227 breakout
asmr-systems
22.9 × 25.4 mm5 parts2LCC0-1.0109 padded high res tight
asmr-systems
227.9 × 67.9 mm5 parts2LCC0-1.01Fpc 1x16 conn breakout
asmr-systems
19.7 × 22 mm3 parts2LCC0-1.01High speed opamp sot-23-5 breakout
asmr-systems
14.2 × 9.4 mm3 parts2LCC0-1.01
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416