Samd51j18a

asmr-systems·development-boards·samd51j18a/samd51j18a.kicad_pcb

Samd51j18a PCB layout, top view — open source Microchip SAM board by asmr-systems

About the Samd51j18a PCB

Samd51j18a is an open source Microchip SAM PCB design by asmr-systems, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 72.4 × 26.7 mm, with 25 components from 15 distinct parts.

Its main chip is the ATSAMD51J18A-AU, from the Microchip SAM family. Other key parts include the NJM2866F33-TE1. By type, the board carries 13 capacitors, 5 resistors, 2 ICs, 2 connectors, 1 crystal and 1 diode.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

development boards

Main components on the Samd51j18a

ATSAMD51J18A-AUNJM2866F33-TE1

Samd51j18a bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATSAMD51J18A-AU
ATSAMD51J18A-A
U1
1
NJM2866F33-TE1
NJM2866F33
U2
1
SC32S-7PF20PPM
32.768kHz
Y1
2
CONN_01X20_MALE
Conn_01x20_Male
J1, J4
1
EL-19-217/R6C-ALM2VY/3T
LED
D1
1
MPZ1608D300BTD25
FB - 30Ohm
L1
2
UMK105CG150JV-F
15pF
C1, C3
8
TMK105BJ104KV8F
0.1uF
C2, C5, C6, C7, C8, C9, C11, C13
1
GMK105CC6105KV-F
1.0uF
C4
1
GRM155R60J106ME15D
10uF
C10
1
AMK105BC6475MV-F
4.7uF
C12
2
ERJ-2GEJ512X
5.1K
R1, R2
1
ERJ-2RKF1002X
10K
R3
1
RC0402FR-7D100RL
100
R4
1
CR0402-FX-4701GLF
4.7K
R5

Samd51j18a design files

The KiCad project lives in the asmr-systems/development-boards repository on GitHub; these links point at the commit this page was built from.

Samd51j18a: common questions

What microcontroller does the Samd51j18a use?

The Samd51j18a is built around the ATSAMD51J18A-AU, from the Microchip SAM family.

How big is the Samd51j18a PCB?

The Samd51j18a measures 72.4 × 26.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Samd51j18a?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Samd51j18a design files?

From the asmr-systems/development-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Samd51j18a design in my own project?

Yes, under the terms of its CC0-1.0 license, which asmr-systems chose for the repository.

Can I test firmware for the Samd51j18a without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in development-boards

Similar boards