3levelstepDown
AVSRAVITEJA·stepDownConverter
About the 3levelstepDown PCB
3levelstepDown is an open source PCB design by AVSRAVITEJA, published on GitHub. It is a 2-layer board measuring 139.6 × 109.9 mm, with 35 components from 17 distinct parts.
Other key parts include the LM2596S-12, LM2596S-5 and XL4015. By type, the board carries 13 capacitors, 5 ICs, 5 connectors, 5 diodes, 5 inductors and 2 resistors.
It belongs with the robotics & motion designs in this gallery.
Main components on the 3levelstepDown
3levelstepDown bill of materials (BOM)
35 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM2596S-12 | TO-263-5_TabPin3 | U1, U4 |
| 2 | LM2596S-5 | TO-263-5_TabPin3 | U2, U3 |
| 1 | XL4015 | TO-263-5_TabPin3 | U5 |
| 5 | Conn_01x02_Pin | JWT_A3963_1x02_P3.96mm_Vertical | J1, J2, J3, J4, J5 |
| 5 | 1N5822 | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5 |
| 3 | 68uH | L_0201_0603Metric | L1, L3, L4 |
| 1 | 120uH | L_0201_0603Metric | L2 |
| 1 | 47uH | L_0201_0603Metric | L5 |
| 4 | 56uF | CP_Elec_6.3x5.8 | C1, C3, C5, C7 |
| 3 | 330uF | CP_Elec_6.3x7.7 | C2, C6, C8 |
| 1 | 220uF | CP_Elec_6.3x5.8 | C4 |
| 1 | 100uF | CP_Elec_6.3x7.7 | C9 |
| 1 | 470uF | CP_Elec_8x10.5 | C10 |
| 1 | 47nF | C_0603_1608Metric | C11 |
| 2 | 1uF | C_0805_2012Metric | C12, C13 |
| 1 | 43k | R_0201_0603Metric | R1 |
| 1 | 2k | R_0201_0603Metric | R2 |
3levelstepDown design files
The KiCad project lives in the AVSRAVITEJA/stepDownConverter repository on GitHub; these links point at the commit this page was built from.
- Layout3levelstepDown.kicad_pcb
- Schematic3levelstepDown.kicad_sch
3levelstepDown: common questions
How big is the 3levelstepDown PCB?
The 3levelstepDown measures 139.6 × 109.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3levelstepDown?
35 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3levelstepDown design files?
From the AVSRAVITEJA/stepDownConverter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3levelstepDown design in my own project?
The repository has no license, so all rights stay with AVSRAVITEJA. Use it as a reference, and ask the author before reusing the design.
More boards in stepDownConverter
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979