8 open source boards using the LM2596S-12
Real designs built with the LM2596S-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mainboard
Cluradev
120 × 90 mm162 parts4LNo license118AVR/Arduino
Dual h bridge
jayanta525
98.8 × 55.1 mm98 parts2LMIT5AutoPLC
dezamora98
208.9 × 119.9 mm358 parts2LNo license2AVR/Arduino
5 to 28v
Sussex-Neuroscience
462.3 × 270.5 mm71 parts2LGPL-3.01STM32
PUTM EV SMART FUSES 2022
PUT-Motorsport
166.4 × 60 mm169 parts4LNo license03levelstepDown
AVSRAVITEJA
139.6 × 109.9 mm35 parts2LNo license0- schematic only · 56 partsSTM32
Protein dispenser
psaundalkar
56 partsMIT0 3levelstepDownIter2
AVSRAVITEJA
83 × 63.5 mm35 parts2LNo license0
How designs wire the LM2596S-12
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LM2596S-12 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin has a inductor on 6 of 6 designs, most often 33 µH (then 47 µH).
- The ON/OFF pin is tied to GND on 6 of 6 designs.
- The VIN pin has a decoupling capacitor on 3 of 6 designs, most often 56 µF (then 100 µF).
- The FB pin has a inductor on 3 of 6 designs, most often 68 µH (then 20 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: VIN 50% · a signal 50% |
|
| OUTpin 2 | Connected to: Signal 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| FBpin 4 | Connected to: 12V 50% · a signal 50% |
|
| ON/OFFpin 5 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by Cluradev, Dual h bridge by jayanta525, AutoPLC by dezamora98 and 5 to 28v by Sussex-Neuroscience.
The LM2596S-12 in open source designs
The gallery holds 8 open source boards using the LM2596S-12 from 7 GitHub repositories; a typical one measures about 139.6 × 90 mm and carries around 85 components.
71% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Mainboard by Cluradev.
Parts used alongside the LM2596S-12
Microcontrollers on boards using the LM2596S-12
What boards using the LM2596S-12 are built for
LM2596S-12: common questions
Where can I find a LM2596S-12 reference design?
Each of the 8 boards on this page is a real design using the LM2596S-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM2596S-12 OUT pin connected?
The OUT pin has a inductor on 6 of 6 designs, most often 33 µH (then 47 µH). Counted from the KiCad layouts of 6 open source designs using the LM2596S-12.
How is the LM2596S-12 ON/OFF pin connected?
The ON/OFF pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LM2596S-12.
What decoupling capacitors do designs use on the LM2596S-12 VIN pin?
The VIN pin has a decoupling capacitor on 3 of 6 designs, most often 56 µF (then 100 µF). Counted from the KiCad layouts of 6 open source designs using the LM2596S-12.
Which microcontrollers do boards using the LM2596S-12 use?
Most are built on STM32 (3) and AVR/Arduino (2).
How big is a typical board using the LM2596S-12?
The median is 139.6 × 90 mm, and 71% are two-layer designs.
What is the most popular open source board using the LM2596S-12?
By GitHub stars, Mainboard by Cluradev, with 118 stars.
Can I simulate one of these boards using the LM2596S-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.