BeetleBoard
avycado13·BeetleBoard
About the BeetleBoard PCB
BeetleBoard is an open source ESP32 PCB design by avycado13, published on GitHub under the Custom license license. It is a 2-layer board measuring 93.8 × 69.5 mm, with 56 components from 33 distinct parts.
Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. Other key parts include the TPS563200 and LSM6DSV320XTR. By type, the board carries 18 connectors, 14 resistors, 10 capacitors, 9 diodes, 3 ICs and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Ever wanted to build a beetleweight but didn't want the huge mess of wires? No? Too bad. Meet BeetleBoard. A perfect board for controlling your beetleweight battlebot using an ESP32.

Main components on the BeetleBoard
BeetleBoard bill of materials (BOM)
56 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-SMD | XIAO-ESP32-C6-SMD | U1 |
| 1 | TPS563200 | SOT-23-6 | U2 |
| 1 | LSM6DSV320XTR | LGA-14L_2p5X3X0p83_STM | U3 |
| 1 | Battery Connector | AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | ESC A | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ESC B | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESC C | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ESC D | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ESC E | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | ESC F | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | VBAT_ESC_A | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J8 |
| 1 | VBAT_ESC_B | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J9 |
| 1 | VBAT_ESC_C | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J10 |
| 1 | VBAT_ESC_E | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J11 |
| 1 | VBAT_ESC_F | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J12 |
| 1 | VBAT_ESC_G | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J13 |
| 1 | VBAT_ESC_D | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J14 |
| 1 | VBAT_ESC_H | Power_SolderPad_2Pin_P5.08mm_D2.0mm | J15 |
| 1 | ESC G | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | ESC H | PinHeader_1x03_P2.54mm_Vertical | J17 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ELRS Reciever | BetaFPV_ELRS_Lite | J18 |
| 1 | FingerTech Switch | Power_SolderPad_2Pin_P5.08mm_D2.0mm | SW1 |
| 1 | SMAJ40CA | D_SMA | D1 |
| 8 | PESD5V0V1BB | D_SOD-323 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 1 | 4.7uH | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 5 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C8 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C7, C9, C10 |
| 9 | 33K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R11, R12 +1 |
| 1 | 56K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 33.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
BeetleBoard design files
The KiCad project lives in the avycado13/BeetleBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutBeetleBoard.kicad_pcb
- SchematicBeetleBoard.kicad_sch
- BOMBOM.csv
BeetleBoard: common questions
What microcontroller does the BeetleBoard use?
The BeetleBoard is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.
How big is the BeetleBoard PCB?
The BeetleBoard measures 93.8 × 69.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BeetleBoard?
56 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BeetleBoard design files?
From the avycado13/BeetleBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BeetleBoard design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the BeetleBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k