Super DMG JACK
About the Super DMG JACK PCB
Super DMG JACK is an open source PCB design by awhit003, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 54.8 × 16 mm, with 18 components from 12 distinct parts.
Other key parts include the PAM8302AADCR and SN74AHC1G14DBVR. By type, the board carries 5 capacitors, 5 resistors, 3 connectors, 2 ICs and 2 inductors.
It belongs with the audio designs in this gallery.
From the project
Super DMG JACK is a replacement headphone/audio PCB for the original Game Boy. It can be used on a stock DMG or the Super DMG-01.
Super DMG JACK is a replacement headphone/audio PCB for the original Game Boy. It can be used on a stock DMG or the Super DMG-01.
It uses a PAM8302 mono amplifier to power the speaker when no headphones are present, but it can also be built as a headphone jack replacement using the amplifier on the CPU board.
The amplifier schematic is based on Adafruit's pam8302 amplifier PCB.
Main components on the Super DMG JACK
Super DMG JACK bill of materials (BOM)
18 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM8302AADCR DIODES(美台) | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | SN74AHC1G14DBVR TI(德州仪器) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U2 |
| 1 | PJ-3043-B XKB Connectivity(中国星坤) | AUDIO-TH_PJ-3043-B | CN1 |
| 1 | DMGB_AUDIO_HEADER | CONN-TH_5P-P1.25_LONGPADS | CN2 |
| 1 | Speaker | CONN-TH_2P-P1.25_HCTL_HC-1.25-2AW_LONGPADS | CN3 |
| 1 | TC33X-2-103E BOURNS | RES-ADJ-SMD_3P-L3.0-W3.8-P1.75-BR | VR1 |
| 2 | FerriteBead_Small | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2 |
| 3 | 1µf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5 |
| 2 | 220pf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 220Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 100Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Super DMG JACK design files
The KiCad project lives in the awhit003/DMG-007 repository on GitHub; these links point at the commit this page was built from.
Super DMG JACK: common questions
How big is the Super DMG JACK PCB?
The Super DMG JACK measures 54.8 × 16 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Super DMG JACK?
18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Super DMG JACK design files?
From the awhit003/DMG-007 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Super DMG JACK design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which awhit003 chose for the repository.
More boards in DMG-007
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687