5 open source boards using the SN74AHC1G14DBVR
Real designs built with the SN74AHC1G14DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Belle
sayanee
44.5 × 44.5 mm24 parts2LNo license4Super DMG JACK
kamicane
54.8 × 16 mm18 parts2LCC-BY-SA-4.0175RP2040/RP2350
Display ctrler
redhotchili0909
141.9 × 37.1 mm50 parts4LNo license1Debugotron SWD Switch
alvarop
30 × 20 mm21 parts4LBSD-3-Clause52Super DMG JACK
awhit003
54.8 × 16 mm18 parts2LCC-BY-SA-4.00
How designs wire the SN74AHC1G14DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74AHC1G14DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The A pin has a pull-up to VCC on 2 of 5 designs, most often 10 kΩ.
- The A pin has a series resistor on 2 of 5 designs, most often 5.1 kΩ (then 47 kΩ).
- The A pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| Apin 2 | Connected to: PAM8302AADCR 40%, a connector 40% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: VCC 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Super DMG JACK by kamicane, Debugotron SWD Switch by alvarop, Belle by sayanee and Display ctrler by redhotchili0909.
The SN74AHC1G14DBVR in open source designs
The gallery holds 5 open source boards using the SN74AHC1G14DBVR from 5 GitHub repositories; a typical one measures about 54.8 × 20 mm and carries around 21 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Super DMG JACK by kamicane.
Parts used alongside the SN74AHC1G14DBVR
Microcontrollers on boards using the SN74AHC1G14DBVR
What boards using the SN74AHC1G14DBVR are built for
SN74AHC1G14DBVR: common questions
Where can I find a SN74AHC1G14DBVR reference design?
Each of the 5 boards on this page is a real design using the SN74AHC1G14DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SN74AHC1G14DBVR A pin?
The A pin has a pull-up to VCC on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74AHC1G14DBVR.
Which microcontrollers do boards using the SN74AHC1G14DBVR use?
Most are built on ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the SN74AHC1G14DBVR?
The median is 54.8 × 20 mm, and 60% are two-layer designs.
What is the most popular open source board using the SN74AHC1G14DBVR?
By GitHub stars, Super DMG JACK by kamicane, with 175 stars.
Can I simulate one of these boards using the SN74AHC1G14DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.