MotorController

AxLab-UofC·GranularIO·Hardware/LAPM/PCB Kicad Files/5_MotorDriverBoard_PCB_Kicad/MotorController.kicad_pcb

MotorController PCB layout, top view — open source board by AxLab-UofC

About the MotorController PCB

MotorController is an open source PCB design by AxLab-UofC, published on GitHub under the MIT license. It is a 2-layer board measuring 28 × 28 mm, with 19 components from 11 distinct parts.

Other key parts include the PCA9685PW and TB6612FNG. By type, the board carries 5 capacitors, 4 modules, 3 ICs, 3 connectors, 3 resistors and 1 diode.

It belongs with the robotics & motion designs in this gallery.

From the project

GranularIO explores the interactivity of granular materials through externally actuated magnetic particles. This repo contains the GUI, Arduino code, mechanical and electrical design files of the prototype device.

Chi Wang, Clara Cui, Alan Pham, Justice T Andersen, Tucker Rae-Grant, and Ken Nakagaki. Granular I/O: Enabling Bi-directional Malleable Interaction for Actuated TUIs with Magnetic Particles. ACM Symposium on User Interface Software and Technology (UIST 2026). DOI: 10.1145/3830398.3830589.

Project Website | Paper PDF | DOI | Video

The EM platform uses an array of electromagnets. The annotated CAD rendering identifies the fabricated components and purchased electromagnets used in the assembly.

MotorController, from the project README
From the project README

Main components on the MotorController

MotorController bill of materials (BOM)

19 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCA9685PW
U1
2
TB6612FNG
U2, U3
4
N20MOTOR
N20Motor
M1, M2, M3, M4
1
CONN_01X12_PIN
Conn_01x12_Pin
J1
2
CONN_01X01_PIN
Conn_01x01_Pin
J2, J3
1
LED
D1
2
47UF/16V
47uF/16V
C1, C2
2
10UF
10uF
C3, C4
1
0.1UF
0.1uF
C5
1
1k
R9
2
10K
10k
RN1, RN2

MotorController design files

The KiCad project lives in the AxLab-UofC/GranularIO repository on GitHub; these links point at the commit this page was built from.

MotorController: common questions

How big is the MotorController PCB?

The MotorController measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MotorController?

19 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MotorController design files?

From the AxLab-UofC/GranularIO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MotorController design in my own project?

Yes, under the terms of its MIT license, which AxLab-UofC chose for the repository.

More boards in GranularIO

Similar boards