MotorHub5x5
AxLab-UofC·GranularIO·Hardware/LAPM/PCB Kicad Files/4_MotherBoard_PCB/MotorHub5x5.kicad_pcb
About the MotorHub5x5 PCB
MotorHub5x5 is an open source NXP PCB design by AxLab-UofC, published on GitHub under the MIT license. It is a 2-layer board measuring 120 × 120 mm, with 69 components from 31 distinct parts.
Its main chip is the PCA9685PW, from the NXP family. Other key parts include the TB6612FNG and Teensy3.2. By type, the board carries 17 connectors, 14 fuses, 8 test points, 7 resistors, 5 diodes and 4 ICs.
From the project
GranularIO explores the interactivity of granular materials through externally actuated magnetic particles. This repo contains the GUI, Arduino code, mechanical and electrical design files of the prototype device.
Chi Wang, Clara Cui, Alan Pham, Justice T Andersen, Tucker Rae-Grant, and Ken Nakagaki. Granular I/O: Enabling Bi-directional Malleable Interaction for Actuated TUIs with Magnetic Particles. ACM Symposium on User Interface Software and Technology (UIST 2026). DOI: 10.1145/3830398.3830589.
Project Website | Paper PDF | DOI | Video
The EM platform uses an array of electromagnets. The annotated CAD rendering identifies the fabricated components and purchased electromagnets used in the assembly.

Main components on the MotorHub5x5
MotorHub5x5 bill of materials (BOM)
69 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA9685PW Teensy3.2 | Teensy32_Custom | U1 |
| 2 | TB6612FNG Teensy3.2 | Teensy32_Custom | U2, U3 |
| 1 | Teensy3.2 | Teensy32_Custom | U4 |
| 1 | CONN_01X12_PIN Barrel_Jack | DC_Barral_JackCUI_PJ-002B | J1 |
| 2 | CONN_01X01_PIN Barrel_Jack | DC_Barral_JackCUI_PJ-002B | J2, J3 |
| 2 | Barrel_Jack | DC_Barral_JackCUI_PJ-002B | J4, J5 |
| 1 | AVPWR | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | BVPWR | PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | CVPWR | PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | DVPWR | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | EVPWR | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | AGNDPWR | PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | BGNDPWR | PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | CGNDPWR | PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | DGNDPWR | PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | EGNDPWR | PinHeader_1x01_P2.54mm_Vertical | J15 |
| 1 | USBC | GCT_USB4105-GF-A | J16 |
| 1 | MCR-B-S-RA-SMT-CS5A-NF-T/R USB_MicroB | MCRBSRASMTCS5ANFTR | J18 |
| 14 | 2A | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder_custom | F1, F2, F3, F4, F5, F6, F7, F8 +6 |
| 14 | ~ | MotorDriverConn | MD1, MD2, MD3, MD4, MD5, MD6, MD7, MD8 +6 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SCL_1 | PinSocket_1x01_P2.54mm_Vertical | TP1 |
| 1 | SCL_2 | PinSocket_1x01_P2.54mm_Vertical | TP2 |
| 1 | SCL_3 | PinSocket_1x01_P2.54mm_Vertical | TP3 |
| 1 | SCL_4 | PinSocket_1x01_P2.54mm_Vertical | TP4 |
| 1 | SDA_1 | PinSocket_1x01_P2.54mm_Vertical | TP5 |
| 1 | SDA_2 | PinSocket_1x01_P2.54mm_Vertical | TP6 |
| 1 | SDA_3 | PinSocket_1x01_P2.54mm_Vertical | TP7 |
| 1 | SDA_4 | PinSocket_1x01_P2.54mm_Vertical | TP8 |
| 5 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 5 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7 |
MotorHub5x5 design files
The KiCad project lives in the AxLab-UofC/GranularIO repository on GitHub; these links point at the commit this page was built from.
MotorHub5x5: common questions
What microcontroller does the MotorHub5x5 use?
The MotorHub5x5 is built around the PCA9685PW, from the NXP family.
How big is the MotorHub5x5 PCB?
The MotorHub5x5 measures 120 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MotorHub5x5?
69 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MotorHub5x5 design files?
From the AxLab-UofC/GranularIO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MotorHub5x5 design in my own project?
Yes, under the terms of its MIT license, which AxLab-UofC chose for the repository.
Can I test firmware for the MotorHub5x5 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in GranularIO
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532