Matrix

ayukmr·matrix·pcb/matrix.kicad_pcb

Matrix PCB layout, top view — open source ESP32 board by ayukmr

About the Matrix PCB

Matrix is an open source ESP32 PCB design by ayukmr, published on GitHub under the MIT license. It is a 2-layer board measuring 53 × 41.5 mm, with 59 components from 14 distinct parts.

Its main chip is the ESP32-C6-MINI-1U, from the ESP32 family. Other key parts include the XC6206PXXXMR. By type, the board carries 32 diodes, 14 resistors, 5 capacitors, 4 switches, 2 ICs and 2 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

Charlieplexed LED matrix using an ESP32

Charlieplexed LED matrix controlled by an ESP32-C6-MINI-1U.

Matrix, from the project README
From the project README

Main components on the Matrix

Matrix bill of materials (BOM)

59 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C6-MINI-1U
ESP32-C6-MINI-1/U
U1
1
XC6206PXXXMR
XC6206PxxxMR
U2
1
CONN_01X02
Conn_01x02
J1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J2
4
SW_Push
SW1, SW2, SW3, SW4
32
C2286
LED_Small
D1, D2, D3, D4, D5, D6, D7, D8 +24
2
C23630
2.2 uF
C1, C2
1
C15849
1 uF
C3
1
C59461
22 uF
C4
1
C14663
0.1 uF
C5
2
C23186
5.1k
R1, R2
2
C25804
10k
R3, R4
8
470
R5, R6, R7, R8, R9, R10, R13, R14
2
22
R11, R12

Matrix design files

The KiCad project lives in the ayukmr/matrix repository on GitHub; these links point at the commit this page was built from.

Matrix: common questions

What microcontroller does the Matrix use?

The Matrix is built around the ESP32-C6-MINI-1U, from the ESP32 family.

How big is the Matrix PCB?

The Matrix measures 53 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Matrix?

59 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Matrix design files?

From the ayukmr/matrix repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Matrix design in my own project?

Yes, under the terms of its MIT license, which ayukmr chose for the repository.

Can I test firmware for the Matrix without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards