Keyboard v2

AYUSH-pro-grammer·keyboard-v2·kicad/keyboard-v2.kicad_pcb

Keyboard v2 PCB layout, top view — open source RP2040/RP2350 board by AYUSH-pro-grammer

About the Keyboard v2 PCB

Keyboard v2 is an open source RP2040/RP2350 PCB design by AYUSH-pro-grammer, published on GitHub. It is a 2-layer board measuring 415 × 133 mm, with 188 components from 24 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MCP23017x-x-SP and XIAO-nRF52840-SMD. By type, the board carries 86 diodes, 85 switches, 6 resistors, 4 connectors, 4 capacitors and 2 ICs.

It belongs with the keyboards and power & battery designs in this gallery.

From the project

A custom mechanical keyboard made with a custom PCB, individual locations for switches, a microcontroller and an I/O expander.

A custom mechanical keyboard made with a custom PCB, individual locations for switches, a microcontroller and an I/O expander.

A small and custom keyboard with mechanical switches and keycaps.

I wanted to build my own mechanical keyboard. This has allowed me to have a go at designing my own PCB, learning more about electronics, microcontrollers and how the keyboard circuits work.

Keyboard v2, from the project README
From the project README

Main components on the Keyboard v2

Keyboard v2 bill of materials (BOM)

188 components, 24 distinct parts.

QtyPartRefs
1
MCP23017x-x-SP
U2
1
XIAO-nRF52840-SMD
U3
1
RaspberryPi_Pico
A1
1
Conn_01x14
J2
1
battery
J3
1
Boost Convertor
J4
1
USB_C_Receptacle_USB2.0_16P
J5
5
SW_Push
SW1, SW2, SW3, SW4, SW5
2
SW_Push
SW6, SW7
2
SW_Push
SW8, SW9
1
SW_Push
SW10
1
SW_Push
SW11
1
SW_Push
SW12
1
SW_Push
SW13
71
SW_Push
SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +63
1
SW_SPST
SW85
84
D
D1, D2, D3, D4, D5, D6, D7, D8 +76
2
SS34
D169, D170
3
100nF
C1, C2, C3
1
10µF
C4
Show 4 more
QtyPartRefs
2
5.1k
R1, R2
1
10k
R4
1
10kohm
R5
2
4.7kΩ
R6, R7

Keyboard v2 design files

The KiCad project lives in the AYUSH-pro-grammer/keyboard-v2 repository on GitHub; these links point at the commit this page was built from.

Keyboard v2: common questions

What microcontroller does the Keyboard v2 use?

The Keyboard v2 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keyboard v2 PCB?

The Keyboard v2 measures 415 × 133 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboard v2?

188 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keyboard v2 design files?

From the AYUSH-pro-grammer/keyboard-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Keyboard v2 design in my own project?

The repository has no license, so all rights stay with AYUSH-pro-grammer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keyboard v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards