13 open source boards using the MCP23017x-x-SP

Real designs built with the MCP23017x-x-SP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the MCP23017x-x-SP

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the MCP23017x-x-SP connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_11 pin is left unconnected on 12 of 12 designs.
  • The SCK_12 pin has a pull-up to 3.3V on 10 of 12 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The SDA_13 pin has a pull-up to 3.3V on 10 of 12 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The NC_14 pin is left unconnected on 12 of 12 designs.
VDD_9pin 9Connected to: 3.3V 67% · a signal 33%
VSS_10pin 10Connected to: GND 100%
NC_11pin 11Connected to: Not connected 100%
SCK_12pin 12Connected to: The microcontroller 67%, a connector 33%
  • Pull-up to 3.3V on 83% · 4.7 kΩ (10), 2.2 kΩ (1)
SDA_13pin 13Connected to: The microcontroller 67%, a connector 33%
  • Pull-up to 3.3V on 83% · 4.7 kΩ (10), 2.2 kΩ (1)
NC_14pin 14Connected to: Not connected 100%
A0_15pin 15Connected to: GND 92%
A1_16pin 16Connected to: GND 92%
A2_17pin 17Connected to: GND 92%
INTB_19pin 19Connected to: Not connected 83% · a signal 17%
INTA_20pin 20Connected to: Not connected 83% · a signal 17%

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FREEBOARD by Ningheim, Usb controller-32 by jcksnvllxr80, T8-Sequencer by lluisestape-upc and Macropad v2 by Anycircle11139s.

The MCP23017x-x-SP in open source designs

The gallery holds 13 open source boards using the MCP23017x-x-SP from 12 GitHub repositories; a typical one measures about 220.5 × 125.5 mm and carries around 96 components.

100% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is FREEBOARD by Ningheim.

Parts used alongside the MCP23017x-x-SP

Microcontrollers on boards using the MCP23017x-x-SP

MCP23017x-x-SP: common questions

Where can I find a MCP23017x-x-SP reference design?

Each of the 13 boards on this page is a real design using the MCP23017x-x-SP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP23017x-x-SP NC_11 pin connected?

The NC_11 pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the MCP23017x-x-SP.

What pull-up resistor is used on the MCP23017x-x-SP SCK_12 pin?

The SCK_12 pin has a pull-up to 3.3V on 10 of 12 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 12 open source designs using the MCP23017x-x-SP.

What pull-up resistor is used on the MCP23017x-x-SP SDA_13 pin?

The SDA_13 pin has a pull-up to 3.3V on 10 of 12 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 12 open source designs using the MCP23017x-x-SP.

Which microcontrollers do boards using the MCP23017x-x-SP use?

Most are built on ESP32 (4), AVR/Arduino (3), RP2040/RP2350 (3) and PIC (1).

How big is a typical board using the MCP23017x-x-SP?

The median is 220.5 × 125.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP23017x-x-SP?

By GitHub stars, FREEBOARD by Ningheim, with 2 stars.

Can I simulate one of these boards using the MCP23017x-x-SP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part