Arrow stand hub

baden·arrow-stand-gen2·hardware/hub/arrow-stand-hub.kicad_pcb

Arrow stand hub PCB layout, top view — open source RISC-V board by baden

About the Arrow stand hub PCB

Arrow stand hub is an open source RISC-V PCB design by baden, published on GitHub. It is a 2-layer board measuring 50 × 85 mm, with 52 components from 22 distinct parts.

Its main chip is the CH32V203C8U6, from the RISC-V family. Other key parts include the SX1262IMLTRT and ME6211C33M5G-N. By type, the board carries 16 capacitors, 16 resistors, 10 LEDs, 3 ICs, 2 connectors and 2 inductors.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

Електрона мішень.

Пристрій, що кріпиться на мішень, фіксує удар (акселерометр), і бездрово передає факт влучання на базову станцію (приймач) за LoRa.

Мета проєкту — мінімально можлива собівартість. Пристрій розхідний: він отримує удари і, можливо, знищується під час стрільби. Тому критерії відбору компонентів — не «найкраще», а «дешевше, при цьому працює».

Ціни — цінова сходинка LCSC при замовленні 100 шт. (2026-11-18).

Main components on the Arrow stand hub

Arrow stand hub bill of materials (BOM)

52 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SX1262IMLTRT
SEMTECH
U1
1
CH32V203C8U6
WCH (Jiangsu Qin Heng)
U2
1
ME6211C33M5G-N
MICRONE (南京微盟)
U4
1
E3SB32E00000KE
32MHz
HOSONIC(鸿星)
Y1
1
HL-SMA-KE-02
SMA
HenryTech
J1
1
TYPE-C-31-M-12
USB-C
HRO
J3
1
B3U-1000P
SPST
HONGHENG
SW1
10
D-G080508G1-KS2
LED
Hubei KENTO
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +2
1
D-G080508G1-KS2
LED
Hubei KENTO
D1
1
LQW15AN56NG80D
56nH
Sunlord
L1
1
VHF100505HQ10NJT
10nH
FH (Guangdong Fenghua Advanced Tech)
L2
4
CL05B104KO5NNNC
100nF
Samsung Electro-Mechanics
C1, C3, C4, C10
1
CL21A106KAYNNNE
100nF
Samsung Electro-Mechanics
C2
4
CL05A105KA5NQNC
1uF
Samsung Electro-Mechanics
C5, C6, C11, C12
2
0402CG120J500NT
12pF
Yageo
C7, C8
1
CL21A106KAYNNNE
10uF
Samsung Electro-Mechanics
C9
2
0402CG101J500NT
100pF
FH (Guangdong Fenghua Advanced Tech)
C13, C14
2
CL05C100JB5NNNC
10pF
Samsung Electro-Mechanics
C15, C16
11
CR0402FF1001G
1k
Uni Royal
R1, R2, R3, R4, R5, R6, R7, R8 +3
2
0402WGF1002TCE
10k
Uni Royal
R11, R13
Show 2 more
QtyPartRefs
2
0402WGF5101TCE
5.1k
Uni Royal
R14, R15
1
0402WGF1003TCE
100k
UNI-ROYAL(Uniroyal Elec)
R16

Arrow stand hub design files

The KiCad project lives in the baden/arrow-stand-gen2 repository on GitHub; these links point at the commit this page was built from.

Arrow stand hub: common questions

What microcontroller does the Arrow stand hub use?

The Arrow stand hub is built around the CH32V203C8U6, from the RISC-V family.

How big is the Arrow stand hub PCB?

The Arrow stand hub measures 50 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arrow stand hub?

52 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arrow stand hub design files?

From the baden/arrow-stand-gen2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arrow stand hub design in my own project?

The repository has no license, so all rights stay with baden. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arrow stand hub without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in arrow-stand-gen2

Similar boards