Arrow stand gen2

baden·arrow-stand-gen2·hardware/target/arrow-stand-gen2.kicad_pcb

Arrow stand gen2 PCB layout, top view — open source RISC-V board by baden

About the Arrow stand gen2 PCB

Arrow stand gen2 is an open source RISC-V PCB design by baden, published on GitHub. It is a 2-layer board measuring 20 × 40 mm, with 40 components from 24 distinct parts.

Its main chip is the CH32V203C8U6, from the RISC-V family. Other key parts include the SX1262IMLTRT, SC7A20HTR, XC6206P332MR and TP4056-42-ESOP8. By type, the board carries 19 capacitors, 6 resistors, 5 ICs, 4 inductors, 2 connectors and 1 transistor.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

Електрона мішень.

Пристрій, що кріпиться на мішень, фіксує удар (акселерометр), і бездрово передає факт влучання на базову станцію (приймач) за LoRa.

Мета проєкту — мінімально можлива собівартість. Пристрій розхідний: він отримує удари і, можливо, знищується під час стрільби. Тому критерії відбору компонентів — не «найкраще», а «дешевше, при цьому працює».

Ціни — цінова сходинка LCSC при замовленні 100 шт. (2026-11-18).

Main components on the Arrow stand gen2

Arrow stand gen2 bill of materials (BOM)

40 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SX1262IMLTRT
SEMTECH
U1
1
CH32V203C8U6
WCH (Jiangsu Qin Heng)
U2
1
SC7A20HTR
SILAN(士兰微)
U3
1
XC6206P332MR
YONGYUTAI
U4
1
TP4056-42-ESOP8
TOPPOWER(南京拓微)
U5
1
2N7002
Jiangsu Changjing Electronics Technology
Q1
1
E3SB32E00000KE
32MHz
HOSONIC(鸿星)
Y1
1
HL-SMA-KE-02
SMA
HenryTech
J1
1
TYPE-C-31-M-12
USB-C
HRO
J3
1
LP802023
LiPo_LP802023_240mAh
LiPower
BT1
1
B3U-1000P
SPST
HONGHENG
SW1
1
LQW15AN56NG80D
56nH
Sunlord
L1
3
VHF100505HQ3N3BT
3.3nH
FH (Guangdong Fenghua Advanced Tech)
L2, L3, L4
6
CL05B104KO5NNNC
100nF
Samsung Electro-Mechanics
C1, C5, C8, C9, C10, C13
1
CL21A106KAYNNNE
10uF
Samsung Electro-Mechanics
C2
2
0402CG120J500NT
12pF
Yageo
C3, C4
4
CL05A105KA5NQNC
1uF
Samsung Electro-Mechanics
C6, C7, C14, C15
1
CL05B103KB5NNNC
10nF
Samsung Electro-Mechanics
C11
2
CL05C100JB5NNNC
10pF
Samsung Electro-Mechanics
C12, C18
1
0402CG101J500NT
100pF
FH (Guangdong Fenghua Advanced Tech)
C16
Show 4 more
QtyPartRefs
2
0402CG3R3C500NT
3.3pF
FH (Guangdong Fenghua Advanced Tech)
C17, C19
2
0402WGF2202TCE
22k
UNI-ROYAL(Uniroyal Elec)
R2, R3
2
0402WGF1002TCE
10k
Uni Royal
R5, R6
2
0402WGF5101TCE
5.1k
Uni Royal
R7, R8

Arrow stand gen2 design files

The KiCad project lives in the baden/arrow-stand-gen2 repository on GitHub; these links point at the commit this page was built from.

Arrow stand gen2: common questions

What microcontroller does the Arrow stand gen2 use?

The Arrow stand gen2 is built around the CH32V203C8U6, from the RISC-V family.

How big is the Arrow stand gen2 PCB?

The Arrow stand gen2 measures 20 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arrow stand gen2?

40 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arrow stand gen2 design files?

From the baden/arrow-stand-gen2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arrow stand gen2 design in my own project?

The repository has no license, so all rights stay with baden. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arrow stand gen2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in arrow-stand-gen2

Similar boards