ESP32-SimpleClick
barratt·ESP32-SimpleClick·circuit/simpleclick.kicad_pcb
About the ESP32-SimpleClick PCB
ESP32-SimpleClick is an open source ESP32 PCB design by barratt, published on GitHub. It is a 2-layer board measuring 35 × 35 mm, with 21 components from 14 distinct parts.
Its main chip is the ESP32-C3-WROOM-2, from the ESP32 family. Other key parts include the USBLC6-2P6, SK6206P332MR and MCP73831-2-OT. By type, the board carries 9 resistors, 5 capacitors, 4 ICs, 1 connector, 1 switch and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
I was looking for a simple small ESP32 that could be used as a desktop or portable IOT button.
I was looking for a simple small ESP32 that could be used as a desktop or portable IOT button.
The rationale behind not using Zigbee or BLE was simplicity & cost for the end user. It can either be connected via type C to a PC or through WiFi using a battery.
If you're looking to build one, I sent everything in the gerbers folder to JLCPCB and paid for SMD assembly. In total I paid £20 for 5 boards, so £4 per button overall. The button and LED needs soldering by hand, however since they're the biggest components, this is easy.

Main components on the ESP32-SimpleClick
ESP32-SimpleClick bill of materials (BOM)
21 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 | SOT-666 | U1 |
| 1 | ESP32-C3-WROOM-2 ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | SK6206P332MR ~ | SC-59_Handsoldering | U3 |
| 1 | MCP73831-2-OT | SOT-23-5 | U4 |
| 1 | C2927302 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | SW_SPST | tact12x12 | SW1 |
| 1 | LED_RGBA | LED_D5.0mm-4_RGB | D1 |
| 4 | 4U7F 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4K7 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 5K1 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 3 | 100R 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7 |
| 2 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
ESP32-SimpleClick design files
The KiCad project lives in the barratt/ESP32-SimpleClick repository on GitHub; these links point at the commit this page was built from.
ESP32-SimpleClick: common questions
What microcontroller does the ESP32-SimpleClick use?
The ESP32-SimpleClick is built around the ESP32-C3-WROOM-2, from the ESP32 family.
How big is the ESP32-SimpleClick PCB?
The ESP32-SimpleClick measures 35 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-SimpleClick?
21 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-SimpleClick design files?
From the barratt/ESP32-SimpleClick repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-SimpleClick design in my own project?
The repository has no license, so all rights stay with barratt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-SimpleClick without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k