Rp2040-mcu design
bauzel·rp2040-mcu-design·rp2040mcu/rp2040.kicad_pcb
About the Rp2040-mcu design PCB
Rp2040-mcu design is an open source RP2040/RP2350 PCB design by bauzel, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 40 × 28.5 mm, with 34 components from 16 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q32JVSS and XC6206PxxxMR. By type, the board carries 18 capacitors, 6 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.
From the project
Mcu Design With Rasperry Pi's RP2040
A minimal RP2040 board with a USB-C connector, designed in KiCad on a 4-layer PCB. This is my first SMD PCB design. I built it by following the "RP2040 Minimal Circuit Design" guide on schemalyzer.com.
The design currently passes KiCad's ERC (schematic) and DRC (PCB) checks only. Nothing has been verified on real hardware, so please run your own checks before ordering this design.
Main components on the Rp2040-mcu design
Rp2040-mcu design bill of materials (BOM)
34 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q32JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | XC6206PxxxMR | SOT-23-3 | U3 |
| 1 | 12MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | Conn_01x15 | PinHeader_1x15_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | BOOTSEL | SW_SPST_B3U-1000P | SW1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW2 |
| 4 | 1uF | C_0603_1608Metric | C1, C2, C4, C6 |
| 2 | 33pf | C_0603_1608Metric | C3, C5 |
| 12 | 100nf | C_0603_1608Metric | C7, C8, C12, C15, C16, C17, C18, C19 +4 |
| 2 | 5.1kΩ | R_0603_1608Metric | R1, R2 |
| 2 | 27 Ω | R_0603_1608Metric | R3, R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | 10k | R_0603_1608Metric | R6 |
Rp2040-mcu design design files
The KiCad project lives in the bauzel/rp2040-mcu-design repository on GitHub; these links point at the commit this page was built from.
- Layoutrp2040mcu/rp2040.kicad_pcb
- Schematicrp2040mcu/rp2040.kicad_sch
Rp2040-mcu design: common questions
What microcontroller does the Rp2040-mcu design use?
The Rp2040-mcu design is built around the RP2040, from the RP2040/RP2350 family.
How big is the Rp2040-mcu design PCB?
The Rp2040-mcu design measures 40 × 28.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rp2040-mcu design?
34 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rp2040-mcu design design files?
From the bauzel/rp2040-mcu-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rp2040-mcu design design in my own project?
Yes, under the terms of its CC0-1.0 license, which bauzel chose for the repository.
Can I test firmware for the Rp2040-mcu design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k