Trill flex base

BelaPlatform·Trill·hardware/flex/trill-flex-base/REV_A2/trill-flex-base.kicad_pcb

Trill flex base PCB layout, top view — open source board by BelaPlatform

About the Trill flex base PCB

Trill flex base is an open source PCB design by BelaPlatform, published on GitHub. It is a 2-layer board measuring 22.5 × 36.3 mm, with 12 components from 7 distinct parts.

Other key parts include the CY8C206X6A. By type, the board carries 4 resistors, 3 connectors, 2 capacitors and 1 IC.

It belongs with the sensors designs in this gallery.

From the project

Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.

Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.

The Bela IDE comes pre-loaded with the Trill library and Trill examples.

- Trill-Linux contains the Trill library and examples for Linux systems, such as Raspberry Pi

- Trill-Arduino contains the Trill library and examples for Arduino, as well as Arduino-compatible systems such as Teensy. These also include examples of how to connect your Trill sensor to Processing to generate visuals.

Main components on the Trill flex base

Trill flex base bill of materials (BOM)

12 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CY8C206X6A
IC1
1
Conn_01x04_Female
J1
1
Conn_01x32
J2
1
Conn_01x02_Female
J3
2
Conn_01x03_Female
Jumper0, Jumper1
2
C-USC0603
C1, C2
4
R-EU_R0603
R1, R2, R3, R4

Trill flex base design files

The KiCad project lives in the BelaPlatform/Trill repository on GitHub; these links point at the commit this page was built from.

Trill flex base: common questions

How big is the Trill flex base PCB?

The Trill flex base measures 22.5 × 36.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Trill flex base?

12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Trill flex base design files?

From the BelaPlatform/Trill repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Trill flex base design in my own project?

The repository has no license, so all rights stay with BelaPlatform. Use it as a reference, and ask the author before reusing the design.

More boards in Trill

Similar boards