TRILL-HUB
BelaPlatform·Trill·hardware/hub/REV_C1/trill-hub.kicad_pcb
About the TRILL-HUB PCB
TRILL-HUB is an open source PCB design by BelaPlatform, published on GitHub. It is a 2-layer board measuring 87 × 34 mm, with 14 components from 3 distinct parts.
By type, the board carries 12 connectors and 2 resistors.
It belongs with the sensors designs in this gallery.
From the project
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.
The Bela IDE comes pre-loaded with the Trill library and Trill examples.
- Trill-Linux contains the Trill library and examples for Linux systems, such as Raspberry Pi
- Trill-Arduino contains the Trill library and examples for Arduino, as well as Arduino-compatible systems such as Teensy. These also include examples of how to connect your Trill sensor to Processing to generate visuals.
TRILL-HUB bill of materials (BOM)
14 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04_Male | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J1, J2 |
| 10 | Conn_01x04 | qwiic_vertical_SMD | J3, J4, J5, J6, J7, J8, J9, J10 +2 |
| 2 | 2.2k | R_0402_1005Metric | R1, R2 |
TRILL-HUB design files
The KiCad project lives in the BelaPlatform/Trill repository on GitHub; these links point at the commit this page was built from.
TRILL-HUB: common questions
How big is the TRILL-HUB PCB?
The TRILL-HUB measures 87 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TRILL-HUB?
14 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TRILL-HUB design files?
From the BelaPlatform/Trill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TRILL-HUB design in my own project?
The repository has no license, so all rights stay with BelaPlatform. Use it as a reference, and ask the author before reusing the design.
More boards in Trill
Trill craft A3
BelaPlatform
52 × 21 mm12 parts2LNo license75Trill flex base
BelaPlatform
22.5 × 36.3 mm12 parts2LNo license75TRILL-BAR
BelaPlatform
101.6 × 21.6 mm8 parts4LNo license75TRILL-RING
BelaPlatform
52 × 52 mm8 parts4LNo license75TRILL-HEX
BelaPlatform
46.5 × 52.9 mm8 parts4LNo license75TRILL-SQUARE
BelaPlatform
69.1 × 69.1 mm8 parts4LNo license75Trill craft
BelaPlatform
53.8 × 21.8 mm7 parts2LNo license75Trill craft castellated
BelaPlatform
53.8 × 21.8 mm7 parts2LNo license75
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956