Cubbies
benoit-bremaud·cubbies·hardware/electronics/cubbies-v1.kicad_sch
About the Cubbies PCB
Cubbies is an open source ESP32 PCB design by benoit-bremaud, published on GitHub under the MIT license. It is a board, with 18 components from 16 distinct parts.
Its main chip is the XIAO ESP32-C3, from the ESP32 family. Other key parts include the GY-521 MPU6050 IMU module and GY-302 BH1750 light module (tier P3). By type, the board carries 6 resistors, 3 ICs, 2 diodes, 1 transistor, 1 connector and 1 buzzer.
It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.
From the project
Cube desk companions on ESP32-C3: colour OLED eyes, buzzer, mic, and an ESP-NOW social layer between cubes
Small cube-shaped desk companions with colour OLED eyes, a microphone and a buzzer, built on the ESP32-C3. Each cube lives on its own on a desk (moods, sleep, reactions to touch and sound) and gains group behaviours when other cubes are in radio range: greetings, contagious moods, synchronised choirs, chain reactions. Designed as a gift for a team: one cube per colleague, one colour per cube, handed out on an "adoption day".
Main components on the Cubbies
Cubbies bill of materials (BOM)
18 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-C3 | U1 | |
| 1 | GY-521 MPU6050 IMU module | U2 | |
| 1 | GY-302 BH1750 light module (tier P3) | U3 | |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | I2C expansion Qwiic/STEMMA QT | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | Passive buzzer 12 mm | BZ1 | |
| 1 | SSD1331 0.95in OLED module | DS1 | |
| 1 | INMP441 I2S microphone module | MK1 | |
| 1 | TTP223 touch module | SW1 | |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 1uF X7R | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 82 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
Cubbies design files
The KiCad project lives in the benoit-bremaud/cubbies repository on GitHub; these links point at the commit this page was built from.
Cubbies: common questions
What microcontroller does the Cubbies use?
The Cubbies is built around the XIAO ESP32-C3, from the ESP32 family.
How many components are on the Cubbies?
18 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cubbies design files?
From the benoit-bremaud/cubbies repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Cubbies design in my own project?
Yes, under the terms of its MIT license, which benoit-bremaud chose for the repository.
Can I test firmware for the Cubbies without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k