HardLabs

ReservoirCon

Bergi84·GrowOMatic·Hardware/reservoirCon/reservoirCon.kicad_pcb

ReservoirCon PCB layout, top view — open source RP2040/RP2350 board by Bergi84

About the ReservoirCon PCB

ReservoirCon is an open source RP2040/RP2350 PCB design by Bergi84, published on GitHub. It is a 4-layer board measuring 30 × 30 mm, with 66 components from 34 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ, MCP6001R and AP63357Q. By type, the board carries 24 capacitors, 22 resistors, 10 connectors, 4 ICs, 3 inductors and 2 diodes.

Main components on the ReservoirCon

W25Q16JVUXIQRP2040MCP6001RAP63357Q

ReservoirCon bill of materials (BOM)

66 components, 34 distinct parts.

QtyPartRefs
1
W25Q16JVUXIQ
U1
1
RP2040
U2
1
MCP6001R
U3
1
AP63357Q
U4
1
12Mhz
Y1
1
USB_B_Micro
J1
1
Conn_01x03
J2
1
Conn_01x02
J3
1
Conn_01x04
J4
2
Conn_01x03
J5, J6
4
Conn_01x02
J7, J8, J9, J10
1
BAT54W
D1
1
Green
D2
1
600R
L1
1
10µ
L2
1
4.7u
L3
2
12p
C1, C2
11
100nF
C3, C6, C8, C9, C10, C11, C14, C17 +3
3
1µF
C4, C15, C22
2
10µ
C5, C7
Show 14 more
QtyPartRefs
1
3.3n
C12
1
100n
C13
2
DNP
C16, C18
2
22µ
C21, C23
2
20R
R1, R2
8
1k
R3, R6, R10, R11, R15, R16, R17, R19
2
27
R4, R5
1
470R
R7
4
10k
R8, R9, R13, R14
1
5.6k
R12
1
1M
R18
1
27k
R20
1
91k
R21
1
30k
R22

ReservoirCon design files

The KiCad project lives in the Bergi84/GrowOMatic repository on GitHub; these links point at the commit this page was built from.

ReservoirCon: common questions

What microcontroller does the ReservoirCon use?

The ReservoirCon is built around the RP2040, from the RP2040/RP2350 family.

How big is the ReservoirCon PCB?

The ReservoirCon measures 30 × 30 mm, has 4 copper layers and is 1.6458 mm thick.

How many components are on the ReservoirCon?

66 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the ReservoirCon design files?

From the Bergi84/GrowOMatic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ReservoirCon design in my own project?

The repository has no license, so all rights stay with Bergi84. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ReservoirCon without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in GrowOMatic

Similar boards