HardLabs

ReST RRD-FGC-Adapter

berryelectronics·ReST32·ReST RRD-FGC-Adapter/ReST RRD-FGC-Adapter.kicad_pcb

ReST RRD-FGC-Adapter PCB layout, top view — open source board by berryelectronics
Simulate this board

About the ReST RRD-FGC-Adapter PCB

ReST RRD-FGC-Adapter is an open source PCB design by berryelectronics, published on GitHub. It is a 2-layer board measuring 28.8 × 43.5 mm, with 18 components from 6 distinct parts.

Other key parts include the MIC5205. By type, the board carries 8 resistors, 4 transistors, 4 connectors, 1 IC and 1 capacitor.

It belongs with the robotics & motion designs in this gallery.

From the project

A modular 3D Printer Controller based on the STM32Duino project

This controller is using extra modules for the Heated Bed, Heaters, Extra Extruder Steppers aswell as extra PWM Output for fans and LED's. If you feel to upgrade your printer, just get the module for it. If you manage to damage the MosFET, just swap it out! This brings a low cost base platform, which you can upgrade freely.

- 72Mhz Cortex M3 (STM32F103V) - 128kb Flash - 3 Axis Stepper + 3 Extruder Stepper (1 on the Mainboard) - 6 Endstop Inputs - 1 Heated Bed + 1 Thermistor - 2 Heaters + 2 Thermistors - High Efficiency 3.3V Buck Converter - 12V Protected by a proper Car Fuse holder (Heatbed…

ReST RRD-FGC-Adapter, from the project README
From the project README

Main components on the ReST RRD-FGC-Adapter

MIC5205

ReST RRD-FGC-Adapter bill of materials (BOM)

18 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MIC5205
U1
4
BSS138
Q1, Q2, Q3, Q4
2
CONN_02X05
P1, P2
2
CONN_02X05
P3, P4
1
2.2uF
C1
8
10K
R1, R2, R3, R4, R5, R6, R7, R8

ReST RRD-FGC-Adapter design files

The KiCad project lives in the berryelectronics/ReST32 repository on GitHub; these links point at the commit this page was built from.

ReST RRD-FGC-Adapter: common questions

How big is the ReST RRD-FGC-Adapter PCB?

The ReST RRD-FGC-Adapter measures 28.8 × 43.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ReST RRD-FGC-Adapter?

18 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ReST RRD-FGC-Adapter design files?

From the berryelectronics/ReST32 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ReST RRD-FGC-Adapter design in my own project?

The repository has no license, so all rights stay with berryelectronics. Use it as a reference, and ask the author before reusing the design.

More boards in ReST32

Similar boards