ReST SD-Module
About the ReST SD-Module
ReST SD-Module is an open source PCB design by berryelectronics, published on GitHub. It is a 2-layer board measuring 33 × 40 mm, with 7 components from 6 distinct parts.
Other key parts include the MIC5205. By type, the board carries 3 connectors, 1 IC, 1 diode, 1 capacitor and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
A modular 3D Printer Controller based on the STM32Duino project
This controller is using extra modules for the Heated Bed, Heaters, Extra Extruder Steppers aswell as extra PWM Output for fans and LED's. If you feel to upgrade your printer, just get the module for it. If you manage to damage the MosFET, just swap it out! This brings a low cost base platform, which you can upgrade freely.
- 72Mhz Cortex M3 (STM32F103V) - 128kb Flash - 3 Axis Stepper + 3 Extruder Stepper (1 on the Mainboard) - 6 Endstop Inputs - 1 Heated Bed + 1 Thermistor - 2 Heaters + 2 Thermistors - High Efficiency 3.3V Buck Converter - 12V Protected by a proper Car Fuse holder (Heatbed…
Main components on the ReST SD-Module
ReST SD-Module bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC5205 | SOT-23-5 | U1 |
| 2 | uSD_Card | SD_Card_Receptacle | CON1, CON2 |
| 1 | CONN_02X05 | Pin_Header_Straight_2x05 | P1 |
| 1 | Led_Small | LED_0805 | D1 |
| 1 | 2.2uF | TantalC_SizeA_EIA-3216_HandSoldering | C1 |
| 1 | 1K | R_0805_HandSoldering | R2 |
ReST SD-Module design files
The KiCad project lives in the berryelectronics/ReST32 repository on GitHub; these links point at the commit this page was built from.
ReST SD-Module: common questions
How big is the ReST SD-Module?
The ReST SD-Module measures 33 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReST SD-Module?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReST SD-Module design files?
From the berryelectronics/ReST32 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ReST SD-Module design in my own project?
The repository has no license, so all rights stay with berryelectronics. Use it as a reference, and ask the author before reusing the design.
More boards in ReST32
Similar boards
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Rp2040 encoder
Twisted-Fields
36.7 × 33.3 mm10 parts2LCustom license417
VESC Controller
paltatech
160 × 90 mm908 parts2LNo license354
${BOARD NAME} Assembly
EPFLXplore
45 × 43.5 mm21 parts4LApache-2.0345
Volumetric display
idlehandsdev
23 × 120 mm70 parts2LCC-BY-SA-4.0312
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243