Starbie

bhavanasrinamthabad1809-hub·starbie·Starbie/Starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by bhavanasrinamthabad1809-hub

About the Starbie PCB

Starbie is an open source ESP32 PCB design by bhavanasrinamthabad1809-hub, published on GitHub. It is a 2-layer board measuring 96.5 × 69 mm, with 8 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 3 switches, 2 ICs, 2 connectors and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

a star shaped character

so basically starbie is a tiny digital pet that lives on your desk, kinda like a tamagotchi lol. it walks around a little oled screen, reacts when you tilt or shake it, shows the temperature and humidity, and now it also gets happy when you press its 3rd button.

for the pins, the dht11 is on D1 (gpio 3), button 1 is on D2 (gpio 4), button 2 is on D3 (gpio 5), scl is on D4 (gpio 6), sda is on D5 (gpio 7) and button 3 is on D6 (gpio 21). the names on my schematic wires (gpio2, gpio3, gpio4) are just labels i typed, the real gpio numbers are the ones i just said.

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
3
SW_Push
SW1, SW2, SW3
1
10K
R1

Starbie design files

The KiCad project lives in the bhavanasrinamthabad1809-hub/starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 96.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the bhavanasrinamthabad1809-hub/starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with bhavanasrinamthabad1809-hub. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards