Multi parameter-Medical-Measurement

BigSmartt01·Multi-parameter-Medical-Measurement-PCB·kicad/Multi-paramter Medicals.kicad_pcb

Multi parameter-Medical-Measurement PCB layout, top view — open source ESP32 board by BigSmartt01

About the Multi parameter-Medical-Measurement PCB

Multi parameter-Medical-Measurement is an open source ESP32 PCB design by BigSmartt01, published on GitHub. It is a 2-layer board measuring 90.3 × 96.7 mm, with 42 components from 32 distinct parts.

Its main chip is the ESP32_DevKit_V1, from the ESP32 family. Other key parts include the MPXHZ6400AC6T1. By type, the board carries 12 connectors, 11 resistors, 5 jumpers, 5 diodes, 4 capacitors and 3 transistors.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

PCB design (one layer) for UNILORIN BME STUDENT - 2026 - on a multi parameter medical measurement that records ECG, pulse, temperature, blood pressure

Project Topic: Design and Development of a Multi-Parameter Patient Monitoring System with ECG Arrhythmia Detection, Real-Time Data Storage, and Wireless Remote Display.

This repository holds the hardware design (schematic, PCB, footprints, fabrication files) for the patient-side sensor and actuator unit. Firmware and the ML/logic layer on the Raspberry Pi are maintained separately by the software team; this repo covers circuitry only.

Multi parameter-Medical-Measurement, from the project README
From the project README

Main components on the Multi parameter-Medical-Measurement

MPXHZ6400AC6T1ESP32_DevKit_V1

Multi parameter-Medical-Measurement bill of materials (BOM)

42 components, 32 distinct parts.

QtyPartRefs
1
MPXHZ6400AC6T1
IC1
1
ESP32_DevKit_V1
A1
2
IRLB8721
Q1, Q2
1
BC337
Q3
1
SWITCH
J1
1
AD8232
J2
1
MAX30102
J3
1
DS18B20
J4
1
BMS
J5
1
12V_MAIN
J6
1
LM2596_5V
J7
1
PUMP
J8
1
VALVE
J9
1
BUZZER
J10
1
OLED
J11
1
BP_JST
J12
1
GND_JUMPER
JP2
2
3V3_JUMPER
JP3, JP5
1
PUMP_JUMPER
JP4
1
5V_JUMPER
JP6
Show 12 more
QtyPartRefs
2
1N4007
D1, D2
1
POWER_LED
D3
1
PUMP_LED
D4
1
VALVE_LED
D5
3
100n
C1, C3, C4
1
1000u
C2
1
6K8
R1
1
12K
R2
3
220R
R3, R4, R8
1
4K7
R5
2
10K
R6, R7
3
1K
R9, R10, R11

Multi parameter-Medical-Measurement design files

The KiCad project lives in the BigSmartt01/Multi-parameter-Medical-Measurement-PCB repository on GitHub; these links point at the commit this page was built from.

Multi parameter-Medical-Measurement: common questions

What microcontroller does the Multi parameter-Medical-Measurement use?

The Multi parameter-Medical-Measurement is built around the ESP32_DevKit_V1, from the ESP32 family.

How big is the Multi parameter-Medical-Measurement PCB?

The Multi parameter-Medical-Measurement measures 90.3 × 96.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Multi parameter-Medical-Measurement?

42 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Multi parameter-Medical-Measurement design files?

From the BigSmartt01/Multi-parameter-Medical-Measurement-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Multi parameter-Medical-Measurement design in my own project?

The repository has no license, so all rights stay with BigSmartt01. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Multi parameter-Medical-Measurement without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards