Iv21-vfd clock with esp32
billism1·vfd-tube-clock·pcb/main-board/iv21-vfd-clock-with-esp32.kicad_pcb
About the Iv21-vfd clock with esp32 PCB
Iv21-vfd clock with esp32 is an open source ESP32 PCB design by billism1, published on GitHub under the MIT license. It is a 2-layer board measuring 101.5 × 40 mm, with 30 components from 27 distinct parts.
Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family. Other key parts include the MAX6921AQI_, MCP3221 and AZ1117-5.0. By type, the board carries 9 resistors, 5 capacitors, 4 ICs, 3 connectors, 3 diodes and 2 transistors.
It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.
From the project
This project is a WiFi-connected clock that uses an IV-21 VFD (Vacuum Fluorescent Display) tube for the display and a custom PCB controlled by an ESP32 microcontroller. Built with PlatformIO using the Arduino framework, it should work with other ESP32 variants and Arduino-compati
This project is a WiFi-connected clock that uses an IV-21 VFD (Vacuum Fluorescent Display) tube for the display and a custom PCB controlled by an ESP32 microcontroller. Built with PlatformIO using the Arduino framework, it should work with other ESP32 variants and Arduino-compatible MCUs.
The PCB is designed around the Seeeduino ESP32-C3 devboard but can be adapted for other microcontrollers. The schematic and PCB design files were created using KiCad 9.0, with firmware development in VS Code with PlatformIO.

Main components on the Iv21-vfd clock with esp32
Iv21-vfd clock with esp32 bill of materials (BOM)
30 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX6921AQI_ | PLCC127P1244X1244X457-28N | U1 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 SEEEDUINO-XIAO-ESP32C3 | MOUDLE14P-SMD-2.54-21X17.8MM (With Through Holes) | U2 |
| 1 | MCP3221 | SOT-23-5 | U4 |
| 1 | AZ1117-5.0 | SOT-89-3_Handsoldering | U6 |
| 1 | MMBT3904 | SOT-23-3 | Q3 |
| 1 | MMBT3904 | SOT-23 | Q4 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | 4328 | ADAFRUIT_4328 | J2 |
| 1 | Barrel_Jack_MountingPin | BarrelJack_Wuerth_6941xx301002 | J4 |
| 1 | 80 | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 2 | SW_SPST | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1, SW2 |
| 1 | LED | LED_1206_3216Metric | D1 |
| 1 | 1N5818 1N5819 | D_SOD-123 | D2 |
| 1 | 36V Zener | D_SOD-128 | D3 |
| 1 | 2MH 2.2mH | L_Radial_D12.0mm_P5.00mm_Fastron_11P | L1 |
| 1 | 33UF 33uF | CP_Elec_8x10.5 | C1 |
| 1 | 0.1UF 0.1uF | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C2 |
| 1 | 100UF 100uF | CP_Elec_8x10.5 | C3 |
| 1 | 22UF 22uF | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C6 |
| 1 | 10UF 10uF | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C7 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 1 | 100 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 4.7K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10K 390K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 700 20K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 62 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Iv21-vfd clock with esp32 design files
The KiCad project lives in the billism1/vfd-tube-clock repository on GitHub; these links point at the commit this page was built from.
Iv21-vfd clock with esp32: common questions
What microcontroller does the Iv21-vfd clock with esp32 use?
The Iv21-vfd clock with esp32 is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family.
How big is the Iv21-vfd clock with esp32 PCB?
The Iv21-vfd clock with esp32 measures 101.5 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iv21-vfd clock with esp32?
30 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Iv21-vfd clock with esp32 design files?
From the billism1/vfd-tube-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Iv21-vfd clock with esp32 design in my own project?
Yes, under the terms of its MIT license, which billism1 chose for the repository.
Can I test firmware for the Iv21-vfd clock with esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k