Driver board
blu006·blu_BOB_and_MISC·2023/led_neon_7seg/driver_board.kicad_pcb
About the Driver board
Driver board is an open source PCB design by blu006, published on GitHub. It is a 2-layer board measuring 61 × 32 mm, with 40 components from 14 distinct parts.
Other key parts include the SE8550X2-HF, ch422 and CD40109B. By type, the board carries 14 resistors, 10 transistors, 7 capacitors, 6 connectors and 3 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
My breakout boards and miscellaneous boards
This repository contains my random items that I probably only produced once or twice.
Main components on the Driver board
Driver board bill of materials (BOM)
40 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SE8550X2-HF | SOT-23 | U1 |
| 1 | ch422 | SO-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | CD40109B | SOIC-16W_5.3x10.2mm_P1.27mm | U3 |
| 8 | Q_NMOS_GSD | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 2 | AO4803A | SOIC-8_3.9x4.9mm_P1.27mm | Q9, Q10 |
| 4 | Conn_02x08_Odd_Even | PinSocket_2x08_P2.00mm_Vertical | J1, J2, J3, J4 |
| 1 | IIC_Conn | PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | pwr_hdr | TerminalBlock_bornier-2_P5.08mm | J7 |
| 3 | 104 | C_0603_1608Metric | C1, C6, C7 |
| 2 | 105 | C_0805_2012Metric | C2, C3 |
| 1 | 106 | C_1206_3216Metric | C4 |
| 1 | 477 | CP_Radial_D7.5mm_P2.50mm | C5 |
| 12 | 101 | R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
| 2 | 103 | R_0603_1608Metric | R13, R14 |
Driver board design files
The KiCad project lives in the blu006/blu_BOB_and_MISC repository on GitHub; these links point at the commit this page was built from.
Driver board: common questions
How big is the Driver board?
The Driver board measures 61 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Driver board?
40 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Driver board design files?
From the blu006/blu_BOB_and_MISC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Driver board design in my own project?
The repository has no license, so all rights stay with blu006. Use it as a reference, and ask the author before reusing the design.
More boards in blu_BOB_and_MISC
RISC-V
Wall Clock Full
blu006
38.1 × 38.1 mm54 parts2LNo license0RISC-V
Inverter Decoder Board
blu006
42.5 × 38.5 mm44 parts2LNo license0RISC-V
ALS Board
blu006
55 × 8 mm25 parts2LNo license0J-Link BOB
blu006
20.5 × 16.5 mm21 parts2LNo license0Pwm gen board
blu006
44.5 × 27.9 mm15 parts2LNo license0RISC-V
Vmon
blu006
30 × 16 mm15 parts2LNo license0WCH CH32/CH55x
CH552 Breakout Board USB-C
blu006
35.6 × 24.1 mm14 parts2LNo license0USB-C to RS485 Converter
blu006
36.9 × 16.4 mm14 parts2LNo license0WCH CH32/CH55x
Ch552g bob
blu006
35.6 × 24.1 mm12 parts2LNo license0RISC-V
Modbus autodir
blu006
34.5 × 16 mm11 parts2LNo license0Pb orangepi
blu006
65 × 105 mm8 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979