CH552 Breakout Board USB-C
blu006·blu_BOB_and_MISC·2024/ch552_usbc/ch552_usbc.kicad_pcb
About the CH552 Breakout Board USB-C
CH552 Breakout Board USB-C is an open source WCH CH32/CH55x PCB design by blu006, published on GitHub. It is a 2-layer board measuring 35.6 × 24.1 mm, with 14 components from 9 distinct parts.
Its main chip is the CH552G, from the WCH CH32/CH55x family. By type, the board carries 4 capacitors, 4 resistors, 3 connectors, 2 switches and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
My breakout boards and miscellaneous boards
This repository contains my random items that I probably only produced once or twice.
Main components on the CH552 Breakout Board USB-C
CH552 Breakout Board USB-C bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH552G | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 3 | 104 | C_0603_1608Metric | C1, C2, C3 |
| 1 | 105 | C_0805_2012Metric | C4 |
| 1 | 103 | R_0603_1608Metric | R1 |
| 1 | 0 | R_0603_1608Metric | R2 |
| 2 | 5.1k | R_0603_1608Metric | R3, R4 |
CH552 Breakout Board USB-C design files
The KiCad project lives in the blu006/blu_BOB_and_MISC repository on GitHub; these links point at the commit this page was built from.
CH552 Breakout Board USB-C: common questions
What microcontroller does the CH552 Breakout Board USB-C use?
The CH552 Breakout Board USB-C is built around the CH552G, from the WCH CH32/CH55x family.
How big is the CH552 Breakout Board USB-C?
The CH552 Breakout Board USB-C measures 35.6 × 24.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CH552 Breakout Board USB-C?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the CH552 Breakout Board USB-C design files?
From the blu006/blu_BOB_and_MISC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CH552 Breakout Board USB-C design in my own project?
The repository has no license, so all rights stay with blu006. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CH552 Breakout Board USB-C without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
More boards in blu_BOB_and_MISC
RISC-V
Wall Clock Full
blu006
38.1 × 38.1 mm54 parts2LNo license0RISC-V
Inverter Decoder Board
blu006
42.5 × 38.5 mm44 parts2LNo license0Driver board
blu006
61 × 32 mm40 parts2LNo license0RISC-V
ALS Board
blu006
55 × 8 mm25 parts2LNo license0J-Link BOB
blu006
20.5 × 16.5 mm21 parts2LNo license0RISC-V
Vmon
blu006
30 × 16 mm15 parts2LNo license0Pwm gen board
blu006
44.5 × 27.9 mm15 parts2LNo license0USB-C to RS485 Converter
blu006
36.9 × 16.4 mm14 parts2LNo license0WCH CH32/CH55x
Ch552g bob
blu006
35.6 × 24.1 mm12 parts2LNo license0RISC-V
Modbus autodir
blu006
34.5 × 16 mm11 parts2LNo license0Pb orangepi
blu006
65 × 105 mm8 parts2LNo license0
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87