Vmon
blu006·blu_BOB_and_MISC·2025/vmon/vmon.kicad_pcb
About the Vmon PCB
Vmon is an open source RISC-V PCB design by blu006, published on GitHub. It is a 2-layer board measuring 30 × 16 mm, with 15 components from 14 distinct parts.
Its main chip is the CH32V003JxMx, from the RISC-V family. Other key parts include the ME6209A50M3G. By type, the board carries 5 capacitors, 5 resistors, 2 ICs, 1 transistor, 1 test point and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
My breakout boards and miscellaneous boards
This repository contains my random items that I probably only produced once or twice.
Main components on the Vmon
Vmon bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003JxMx | SOP-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ME6209A50M3G | SOT-23 | U2 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | Program | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | TP1 |
| 1 | D | D_MELF | D1 |
| 1 | 15p | C_0805_2012Metric | C1 |
| 2 | 10u | C_1206_3216Metric | C2, C5 |
| 1 | 1u | C_0805_2012Metric | C3 |
| 1 | 100n | C_0603_1608Metric | C4 |
| 1 | 150k | R_0603_1608Metric | R1 |
| 1 | 47k | R_0603_1608Metric | R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
| 1 | 1 | R_0603_1608Metric | R4 |
| 1 | 100k | R_0603_1608Metric | R5 |
Vmon design files
The KiCad project lives in the blu006/blu_BOB_and_MISC repository on GitHub; these links point at the commit this page was built from.
- Layout2025/vmon/vmon.kicad_pcb
- Schematic2025/vmon/vmon.kicad_sch
Vmon: common questions
What microcontroller does the Vmon use?
The Vmon is built around the CH32V003JxMx, from the RISC-V family.
How big is the Vmon PCB?
The Vmon measures 30 × 16 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vmon?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vmon design files?
From the blu006/blu_BOB_and_MISC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vmon design in my own project?
The repository has no license, so all rights stay with blu006. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vmon without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in blu_BOB_and_MISC
RISC-V
Wall Clock Full
blu006
38.1 × 38.1 mm54 parts2LNo license0RISC-V
Inverter Decoder Board
blu006
42.5 × 38.5 mm44 parts2LNo license0Driver board
blu006
61 × 32 mm40 parts2LNo license0RISC-V
ALS Board
blu006
55 × 8 mm25 parts2LNo license0J-Link BOB
blu006
20.5 × 16.5 mm21 parts2LNo license0Pwm gen board
blu006
44.5 × 27.9 mm15 parts2LNo license0USB-C to RS485 Converter
blu006
36.9 × 16.4 mm14 parts2LNo license0WCH CH32/CH55x
CH552 Breakout Board USB-C
blu006
35.6 × 24.1 mm14 parts2LNo license0WCH CH32/CH55x
Ch552g bob
blu006
35.6 × 24.1 mm12 parts2LNo license0RISC-V
Modbus autodir
blu006
34.5 × 16 mm11 parts2LNo license0Pb orangepi
blu006
65 × 105 mm8 parts2LNo license0
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105