Modbus autodir

blu006·blu_BOB_and_MISC·2026/autodir_sch/autodir_sch.kicad_pcb

Modbus autodir PCB layout, top view — open source RISC-V board by blu006

About the Modbus autodir PCB

Modbus autodir is an open source RISC-V PCB design by blu006, published on GitHub. It is a 2-layer board measuring 34.5 × 16 mm, with 11 components from 8 distinct parts.

Its main chip is the CH32V003JxMx, from the RISC-V family. Other key parts include the ST485E. By type, the board carries 3 connectors, 3 capacitors, 3 resistors and 2 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

My breakout boards and miscellaneous boards

This repository contains my random items that I probably only produced once or twice.

Main components on the Modbus autodir

Modbus autodir bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
CH32V003JxMx
U1
1
ST485E
U2
1
UART
J1
1
MB
J2
1
PROG
J3
3
104
C1, C2, C3
1
121
R1
2
512
R2, R3

Modbus autodir design files

The KiCad project lives in the blu006/blu_BOB_and_MISC repository on GitHub; these links point at the commit this page was built from.

Modbus autodir: common questions

What microcontroller does the Modbus autodir use?

The Modbus autodir is built around the CH32V003JxMx, from the RISC-V family.

How big is the Modbus autodir PCB?

The Modbus autodir measures 34.5 × 16 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Modbus autodir?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Modbus autodir design files?

From the blu006/blu_BOB_and_MISC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Modbus autodir design in my own project?

The repository has no license, so all rights stay with blu006. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Modbus autodir without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in blu_BOB_and_MISC

Similar boards