SpiritBall
bmccool·SpiritBall·PCB/SpiritBall.kicad_pcb
About the SpiritBall PCB
SpiritBall is an open source ESP32 PCB design by bmccool, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 61 components from 19 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AZ1117CD-3.3TRG1. By type, the board carries 41 diodes, 6 capacitors, 5 connectors, 5 resistors, 2 ICs and 2 switches.
It belongs with the displays & leds designs in this gallery.
From the project
Festive decoration based on ESP32-S3 and WS2812B LEDs
- [[2022-11-05]] - I've been experimenting with different patterns and have got to the point I have things worth saving. So I'm spending some time to update github. Also switched over to C++ for most things, but I kept the [[RMT]] encoder in C because I didn't feel like re-writing it and it works well enough as is... Maybe that's a task for a later date. Things I still need to do: - [ ] Settle on a handful of set patterns (including OFF) - [ ] Cycle through set patterns with onboard buttons - [ ] Add some sort of software over-current protection - [ ] Update via USB-C cable - [ ] Update via…
Main components on the SpiritBall
SpiritBall bill of materials (BOM)
61 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AZ1117CD-3.3TRG1 | TO-252-2 | U2 |
| 1 | 105450-0101 | USB_C_MOLEX_105450-0101 | J1 |
| 1 | TAG_CONNECT_JTAG | Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J2 |
| 1 | HEADER_DBG | PinHeader_2x03_P1.27mm_Vertical | J3 |
| 1 | HEADER_JTAG | PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | TAG_CONNECT_DBG | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J5 |
| 2 | TS-1187A-B-A-B | SW_TS-1187A-B-A-B | SW1, SW2 |
| 35 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +27 |
| 3 | 1N5819HW-7-F | D_SOD-123 | D36, D37, D38 |
| 3 | LESD5Z5.0CT1G | D_SOD-523 | D39, D40, D41 |
| 1 | 1UF 1uF | C_0402_1005Metric | C1 |
| 2 | 10UF 10uF | C_0402_1005Metric | C2, C4 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C3 |
| 1 | 22UF 22uF | C_0402_1005Metric | C5 |
| 1 | 1000UF 1000uF | C_Elec_8x10.2 | C6 |
| 2 | 10K | R_0402_1005Metric | R1, R5 |
| 1 | 0k | R_0402_1005Metric | R2 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R3, R4 |
SpiritBall design files
The KiCad project lives in the bmccool/SpiritBall repository on GitHub; these links point at the commit this page was built from.
SpiritBall: common questions
What microcontroller does the SpiritBall use?
The SpiritBall is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the SpiritBall PCB?
The SpiritBall measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SpiritBall?
61 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SpiritBall design files?
From the bmccool/SpiritBall repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SpiritBall design in my own project?
The repository has no license, so all rights stay with bmccool. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SpiritBall without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k