Supreme
BobDaBanana27·supreme-PCB
About the Supreme PCB
Supreme is an open source RP2040/RP2350 PCB design by BobDaBanana27, published on GitHub. It is a 2-layer board measuring 130 × 110 mm, with 15 components from 8 distinct parts.
Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the HS96L03W2C03 and TC1262-3.3VDB. By type, the board carries 8 switches, 3 ICs, 2 resistors and 1 capacitor.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
For Hack Club Half Life
The first hour consisted of nothing much but research into parts and fitting within the budget. I ended up settling on these parts, as seen in the image below. Hours 2-5 all consisted of working inside KiCad to build and test the PCB. For the PCB layout file, I built out a standard 1.6 mm thick board on an A4 sheet using KiCad. On the board, I used a USB-C connector for power and data, the RP2040-Zero as the computer, a couple of rotary encoders for dial controls, six tactile switches for the macro buttons, and an OLED display for visuals. To wrap up the power side, I added a 3.3V regulator…

Main components on the Supreme
Supreme bill of materials (BOM)
15 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-Zero RP2040-ZERO Waveshare(微雪电子) | COMM-SMD_RP2040-ZERO | U1 |
| 1 | HS96L03W2C03 HS(汉昇) | OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U2 |
| 1 | TC1262-3.3VDB MICROCHIP(美国微芯) | SOT-223-3_L6.5-W3.5-P3.05-LS7.0 | U3 |
| 6 | KMR221GLFS C&K | KEY-SMD_KMR2XXGXXX | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | PEC11R-4215F-S0024 BOURNS | SW-TH_5P-L12.5-W13.4-P2.50-LS14.5 | SW7, SW8 |
| 1 | USB4120-03-C GCT | TYPE-C-SMD_USB4120-03-C | USB1 |
| 1 | 100nF | C0805 | C1 |
| 2 | 5.1k | R0805 | R1, R2 |
Supreme design files
The KiCad project lives in the BobDaBanana27/supreme-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutCustom_MacroPad_Pro.kicad_pcb
- SchematicCustom_MacroPad_Pro.kicad_sch
- BOMBOM.csv
Supreme: common questions
What microcontroller does the Supreme use?
The Supreme is built around the RP2040-Zero, from the RP2040/RP2350 family.
How big is the Supreme PCB?
The Supreme measures 130 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Supreme?
15 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Supreme design files?
From the BobDaBanana27/supreme-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Supreme design in my own project?
The repository has no license, so all rights stay with BobDaBanana27. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Supreme without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k