31 open source boards using the HS96L03W2C03

Real designs built with the HS96L03W2C03, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

31 boardsClear filters|Most starred

How designs wire the HS96L03W2C03

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the HS96L03W2C03 connects to, and the resistors, capacitors and other passives placed on it.

GND_1pin 1Connected to: GND 100%
VCC_2pin 2Connected to: 3.3V 97%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nsec badge-2025 by nsec, WalkieTalkie Front by GuzziFlipFlops, Tamagotchi by TaniWanKenobi and CinderV2-Filament-Dryer by CircuitGuy943.

The HS96L03W2C03 in open source designs

The gallery holds 31 open source boards using the HS96L03W2C03 from 30 GitHub repositories; a typical one measures about 64.3 × 76.8 mm and carries around 13 components.

94% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Nsec badge-2025 by nsec.

Microcontrollers on boards using the HS96L03W2C03

HS96L03W2C03: common questions

Where can I find a HS96L03W2C03 reference design?

Each of the 31 boards on this page is a real design using the HS96L03W2C03. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the HS96L03W2C03?

The XIAO-ESP32-C3-SMD, XIAO-ESP32-C6-DIP, ISM303DACTR, LSF0108PWR and RP2040-Zero appear in the most repositories here.

Which microcontrollers do boards using the HS96L03W2C03 use?

Most are built on ESP32 (23), RP2040/RP2350 (3), AVR/Arduino (2) and STM32 (1).

How big is a typical board using the HS96L03W2C03?

The median is 64.3 × 76.8 mm, and 94% are two-layer designs.

What is the most popular open source board using the HS96L03W2C03?

By GitHub stars, Nsec badge-2025 by nsec, with 61 stars.

Can I simulate one of these boards using the HS96L03W2C03 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part