H616 devboard
Bogdan8266·h616-board·Hardware/H616_DDR3/H616_devboard.kicad_pcb
About the H616 devboard PCB
H616 devboard is an open source PCB design by Bogdan8266, published on GitHub under the CERN-OHL-P-2.0 license. It is a 8-layer board measuring 50 × 50 mm, with 165 components from 57 distinct parts.
Other key parts include the H616, K4B8G1646D, AXP305, SW6206 and KLMBG2JETD-B041. By type, the board carries 93 capacitors, 38 resistors, 10 ICs, 6 inductors, 5 connectors and 5 diodes.
It belongs with the power & battery, dev boards & breakouts and iot & wireless designs in this gallery.
From the project
8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.
A compact, battery-powered 64-bit ARM development board measuring 50 mm × 50 mm based on the Allwinner H616 Quad-Core Cortex-A53 SoC with integrated powerbank PMU, high-speed DDR3, eMMC 5.1, and dual-band Wi-Fi.
Unlike standard commercial H616 boards (Orange Pi, Banana Pi, etc.) that require a 5V/3A wall adapter and shut down the moment you unplug the cable, Nebula Board features an onboard bidirectional fast-charging system that runs from a single Li-ion cell (18650 / Li-Po) and recharges via USB-C with USB-PD / QC4+.

Main components on the H616 devboard
H616 devboard bill of materials (BOM)
165 components, 57 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | H616 | H616_TFBGA284 | U1 |
| 1 | K4B8G1646D | BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm | U2 |
| 1 | AXP305 | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm_ThermalVias | U3 |
| 1 | SW6206 ISMARTWARE | QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm_ThermalVias | U4 |
| 1 | KLMBG2JETD-B041 Samsung | LFBGA-153_11.5x13mm_Layout14x14_P0.5mm | U6 |
| 1 | AP6256 AMPAK Tech | AP6255 | U7 |
| 4 | D3V3XA4B10LP | Diodes_UDFN-10_1x2.5mm_P0.5mm | U8, U9, U10, U11 |
| 1 | AO3420_C358680 Alpha & Omega Semicon | SOT-23-3 | Q1 |
| 2 | AO3401A | SOT-23 | Q2, Q3 |
| 1 | 24MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | Micro_SD_Card_Det2 | sd-short | J1 |
| 1 | HDMI_D_1.4 | HDMI_Micro-D_Molex_46765-1xxx | J2 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J3, J4 |
| 1 | Conn_01x40_Pin | DIP-30_100 | J5 |
| 1 | Antenna_Shield | U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | CK_KMS2xxG | SW_SPST_CK_KMS2xxGP | SW1 |
| 2 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP8 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | B5819W | D_SOD-123 | D3 |
| 1 | D_Schottky | D_SOD-323_HandSoldering | D4 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SK6805 | LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D5 |
| 5 | 1,5uH | L_Changjiang_FNR252010S | L1, L2, L3, L4, L5 |
| 1 | 2.2uH | L_Changjiang_FNR252010S | L6 |
| 8 | 100n | C_0402_1005Metric | C1, C2, C58, C61, C62, C70, C71, C91 |
| 21 | 1u | C_0402_1005Metric | C3, C4, C5, C6, C8, C9, C10, C11 +13 |
| 1 | 2.2p | C_0402_1005Metric | C7 |
| 25 | 10u | C_0402_1005Metric | C15, C16, C17, C18, C19, C20, C23, C24 +17 |
| 2 | 4.7u | C_0402_1005Metric | C21, C65 |
| 16 | 2.2u | C_0402_1005Metric | C40, C41, C42, C43, C44, C45, C46, C47 +8 |
| 2 | 470n | C_0402_1005Metric | C54, C55 |
| 2 | 18p | C_0402_1005Metric | C59, C60 |
| 1 | 220n | C_0402_1005Metric | C63 |
| 1 | 1n | C_0402_1005Metric | C64 |
| 5 | 22uF | C_0402_1005Metric | C72, C73, C77, C79, C80 |
| 3 | 330pF | C_0402_1005Metric | C74, C75, C76 |
| 1 | 100nF | C_0402_1005Metric | C78 |
| 2 | 0.1u | C_0402_1005Metric | C83, C85 |
| 1 | 10n | C_0402_1005Metric | C89 |
| 2 | 0 | C_0402_1005Metric | C92, C93 |
| 7 | 2K | R_0402_1005Metric | R1, R2, R15, R16, R17, R18, R22 |
| 3 | 240R | R_0402_1005Metric | R3, R5, R6 |
| 1 | 100R | R_0402_1005Metric | R4 |
| 2 | 0R | R_0402_1005Metric | R7, R9 |
| 1 | NC | R_0402_1005Metric | R8 |
| 1 | 1R | R_0402_1005Metric | R10 |
| 1 | 33R | R_0402_1005Metric | R11 |
| 2 | 1K | R_0402_1005Metric | R14, R21 |
| 1 | 150k | R_0402_1005Metric | R19 |
| 6 | 10K | R_0402_1005Metric | R20, R28, R29, R31, R35, R36 |
| 2 | 5.1k | R_0402_1005Metric | R23, R24 |
| 1 | 27K | R_0402_1005Metric | R25 |
| 2 | 100 | R_0402_1005Metric | R26, R32 |
| 1 | 5mR | R_0402_1005Metric | R27 |
| 1 | 20K | R_0402_1005Metric | R30 |
| 2 | 1.8K | R_0402_1005Metric | R33, R34 |
| 1 | 0 | R_0402_1005Metric | R37 |
| 3 | R_Pack04 | R_Array_Convex_4x0402 | RN1, RN2, RN3 |
H616 devboard design files
The KiCad project lives in the Bogdan8266/h616-board repository on GitHub; these links point at the commit this page was built from.
H616 devboard: common questions
How big is the H616 devboard PCB?
The H616 devboard measures 50 × 50 mm, has 8 copper layers and is 1.0196 mm thick.
How many components are on the H616 devboard?
165 components, from 57 distinct parts. The full bill of materials is listed on this page.
Where can I download the H616 devboard design files?
From the Bogdan8266/h616-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the H616 devboard design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Bogdan8266 chose for the repository.
More boards in h616-board
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k