Sarcat bottom
Bohlebots-Sarcat·sarcat-bottom-pcb·bottomPCB/bottomPCB.kicad_pcb
About the Sarcat bottom PCB
Sarcat bottom is an open source ESP32 PCB design by Bohlebots-Sarcat, published on GitHub. It is a 2-layer board measuring 184.8 × 128.4 mm, with 44 components from 26 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the XT30_HORIZONTAL, LM1117IMPX-3_3_NOPB and C722865. By type, the board carries 13 resistors, 7 capacitors, 4 ICs, 4 connectors, 2 modules and 2 LEDs.
Main components on the Sarcat bottom
Sarcat bottom bill of materials (BOM)
44 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | WIFIM-SMD_ESP32-WROOM-32-N4 | U2 |
| 1 | XT30_HORIZONTAL XT30_horizontal | CONN-TH_XT30PW-M | U3 |
| 2 | LM1117IMPX-3_3_NOPB | SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | U8, U9 |
| 1 | C722865 AKKU 1 | CONN-TH_XH-3AW-C722865 | A1 |
| 1 | C722865 AKKU 2 | CONN-TH_XH-3AW-C722865 | A2 |
| 1 | XT30UPB-F | CONN-TH_XT30UPB-F | CN2 |
| 2 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J2, J4 |
| 1 | CONN_01X02 Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J3 |
| 5 | ~ | ESCON-V | ESCON-V1, ESCON-V2, ESCON-V3, ESCON-V4, ESCON-V5 |
| 2 | Pfostenstecker_6_2x3 | HDR-TH_6P-P2.54-V-F-R2-C3-S2.54-4 | I2C1, I2C2 |
| 1 | ~ | KICKER | Kicker1 |
| 2 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | LB-L1, LB-S1 |
| 1 | Pfostenstecker_8_2x4 | IDC-TH_8P-P2.54-V-R2-C4-S2.54 | Prog.1 |
| 1 | LED1 led1 | LED-SMD_6P-L5.0-W5.0-TL_TC5050RGBF08 | LED1 |
| 1 | ~ | TASTER_LED | Taster_LED1 |
| 1 | 5V | D36V28FX | D36V28FX1 |
| 1 | SMD-1UF SMD-1uF | C0603 | C3 |
| 1 | SMD-220UF SMD-220uF | CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C4 |
| 1 | SMD-220UF_50V SMD-220uF_50V | CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C5 |
| 1 | SMD-100NF SMD-100nF | C0603 | C6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RVT1A221M0605-C72494 | CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C7 |
| 1 | SMD-680UF SMD-680uF | CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C8 |
| 1 | Pinhead_1x02H | HDR-TH_2P-P2.54-H-M-W10.4 | C-Big1 |
| 9 | SMD-10K SMD-10k | R0603 | R1, R2, R3, R4, R6, R7, R11, R12 +1 |
| 1 | SMD-100R | R0603 | R5 |
| 3 | SMD-220R | R0603 | R8, R9, R10 |
Sarcat bottom design files
The KiCad project lives in the Bohlebots-Sarcat/sarcat-bottom-pcb repository on GitHub; these links point at the commit this page was built from.
Sarcat bottom: common questions
What microcontroller does the Sarcat bottom use?
The Sarcat bottom is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Sarcat bottom PCB?
The Sarcat bottom measures 184.8 × 128.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sarcat bottom?
44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sarcat bottom design files?
From the Bohlebots-Sarcat/sarcat-bottom-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sarcat bottom design in my own project?
The repository has no license, so all rights stay with Bohlebots-Sarcat. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sarcat bottom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k