4 open source boards using the LM1117IMPX-3_3_NOPB

Real designs built with the LM1117IMPX-3_3_NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LM1117IMPX-3_3_NOPB in open source designs

The gallery holds 4 open source boards using the LM1117IMPX-3_3_NOPB from 3 GitHub repositories; a typical one measures about 80.6 × 90.6 mm and carries around 47 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Main v02 by bohlebots.

Parts used alongside the LM1117IMPX-3_3_NOPB

Microcontrollers on boards using the LM1117IMPX-3_3_NOPB

LM1117IMPX-3_3_NOPB: common questions

Where can I find a LM1117IMPX-3_3_NOPB reference design?

Each of the 4 boards on this page is a real design using the LM1117IMPX-3_3_NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM1117IMPX-3_3_NOPB?

The XT30_horizontal, ESP32-WROOM-32, Pfostenstecker_10_2x5 and Switch appear in the most repositories here.

Which microcontrollers do boards using the LM1117IMPX-3_3_NOPB use?

Most are built on ESP32 (4).

How big is a typical board using the LM1117IMPX-3_3_NOPB?

The median is 80.6 × 90.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM1117IMPX-3_3_NOPB?

By GitHub stars, Main v02 by bohlebots, with 1 stars.

Can I simulate one of these boards using the LM1117IMPX-3_3_NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part