Panel
boldx·edid-nuzzler·hw/panel.kicad_pcb
About the Panel PCB
Panel is an open source RISC-V PCB design by boldx, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 32 components from 15 distinct parts.
Its main chip is the CH32V003AXMX, from the RISC-V family. Other key parts include the 74LVC1G3157 and CH340N. By type, the board carries 12 resistors, 7 capacitors, 5 ICs, 4 connectors, 2 diodes and 1 transistor.
Main components on the Panel
Panel bill of materials (BOM)
32 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74LVC1G3157 | SOT-363_SC-70-6_Handsoldering | U1, U2, U5 |
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CH32V003AXMX CH32V003AxMx | SOP-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | BSS84AK | SOT-23 | Q1 |
| 2 | HDMI_A | HDMI_A_Molex_208658-1001_Horizontal | J1, J2 |
| 1 | CONN_02X03_COUNTER_CLOCKWISE Conn_02x03_Counter_Clockwise | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J4 |
| 1 | SW_Push | SW_XKB_TS-1101-C-W | SW1 |
| 1 | LED_Small | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | BAT54GW | D_SOD-123 | D2 |
| 6 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7 |
| 1 | 0.1U 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 5 | 1K5 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R12, R13 |
| 5 | 5K1 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R8, R9, R10 |
| 2 | 47K 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
Panel design files
The KiCad project lives in the boldx/edid-nuzzler repository on GitHub; these links point at the commit this page was built from.
- Layouthw/panel.kicad_pcb
- BOMhw/full_bom.csv
Panel: common questions
What microcontroller does the Panel use?
The Panel is built around the CH32V003AXMX, from the RISC-V family.
How big is the Panel PCB?
The Panel measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Panel?
32 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panel design files?
From the boldx/edid-nuzzler repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panel design in my own project?
The repository has no license, so all rights stay with boldx. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in edid-nuzzler
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105