19 open source boards using the 74LVC1G3157

Real designs built with the 74LVC1G3157, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the 74LVC1G3157

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74LVC1G3157 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 1 µF).
  • The LCH_6 pin has a series resistor on 5 of 12 designs, most often 4.7 kΩ (then 3.3 kΩ).
GNDpin 2Connected to: GND 67% · not connected 25%
VCCpin 5Connected to: 3.3V 75% · not connected 17%
  • Decoupling capacitor on 42% · 100 nF (5), 1 µF (4), 10 pF (2)
LCH_6pin 6Connected to: 74LVC1G3157 33%, the microcontroller 25%
  • Series resistor on 42% · 4.7 kΩ (2), 3.3 kΩ (1), 24 Ω (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 4HPico by rheslip, Duet 3 Mini 5+ Ethernet by Duet3D, PiPtr by jmlzone and GlitchBob-LPC by parasyte.

The 74LVC1G3157 in open source designs

The gallery holds 19 open source boards using the 74LVC1G3157 from 12 GitHub repositories; a typical one measures about 70 × 84.6 mm and carries around 83 components.

63% use four copper layers or more, and 16% carry an open source license.

The most starred is 4HPico by rheslip.

Parts used alongside the 74LVC1G3157

Microcontrollers on boards using the 74LVC1G3157

74LVC1G3157: common questions

Where can I find a 74LVC1G3157 reference design?

Each of the 19 boards on this page is a real design using the 74LVC1G3157. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G3157 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the 74LVC1G3157.

What resistor goes on the 74LVC1G3157 LCH_6 pin?

The LCH_6 pin has a series resistor on 5 of 12 designs, most often 4.7 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 12 open source designs using the 74LVC1G3157.

Which microcontrollers do boards using the 74LVC1G3157 use?

Most are built on RP2040/RP2350 (3), FPGA (2), STM32 (2) and RISC-V (2).

How big is a typical board using the 74LVC1G3157?

The median is 70 × 84.6 mm, and 37% are two-layer designs.

What is the most popular open source board using the 74LVC1G3157?

By GitHub stars, 4HPico by rheslip, with 83 stars.

Can I simulate one of these boards using the 74LVC1G3157 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part