Esp32c3 boilerplate
borisnimcevic·esp32c3_boilerplate·hardware/esp32c3_boilerplate-design/esp32c3_boilerplate.kicad_pcb
About the Esp32c3 boilerplate PCB
Esp32c3 boilerplate is an open source ESP32 PCB design by borisnimcevic, published on GitHub. It is a 2-layer board measuring 63.5 × 33 mm, with 27 components from 22 distinct parts.
Its main chip is the ESP32-C3FH4, from the ESP32 family. Other key parts include the MIC5524-3.3YMT-TZ and W25Q16JVSSIQ. By type, the board carries 10 capacitors, 7 resistors, 3 ICs, 3 inductors, 1 crystal and 1 connector.
Main components on the Esp32c3 boilerplate
Esp32c3 boilerplate bill of materials (BOM)
27 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3FH4 | QFN50P500X500X90-33N | U1 |
| 1 | MIC5524-3.3YMT-TZ | VREG_MIC5524-3.3YMT-TZ | U2 |
| 1 | W25Q16JVSSIQ | SOIC127P790X216-8N | U3 |
| 1 | 40MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J1 |
| 1 | 2450AT18A100E | ANTC3216X140N | AE1 |
| 1 | SR05 | SOT143 | DA1 |
| 1 | 2.7 nH | L_0402_1005Metric | L1 |
| 1 | 3.9 nH | L_0402_1005Metric | L2 |
| 1 | 39nH | L_0402_1005Metric | L3 |
| 2 | 8pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 2.2uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4 |
| 1 | 4.7uF | L_0402_1005Metric | C5 |
| 2 | 100nF | L_0402_1005Metric | C6, C8 |
| 1 | 1pF | C_0402_1005Metric | C7 |
| 1 | 1uF | L_0402_1005Metric | C9 |
| 1 | 10nF | L_0402_1005Metric | C10 |
| 2 | 5.1k 1% | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4 |
| 1 | 0 | R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R2 |
| 1 | 10k | R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_0402_1005Metric | R5, R6 |
| 1 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
Esp32c3 boilerplate design files
The KiCad project lives in the borisnimcevic/esp32c3_boilerplate repository on GitHub; these links point at the commit this page was built from.
Esp32c3 boilerplate: common questions
What microcontroller does the Esp32c3 boilerplate use?
The Esp32c3 boilerplate is built around the ESP32-C3FH4, from the ESP32 family.
How big is the Esp32c3 boilerplate PCB?
The Esp32c3 boilerplate measures 63.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32c3 boilerplate?
27 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32c3 boilerplate design files?
From the borisnimcevic/esp32c3_boilerplate repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32c3 boilerplate design in my own project?
The repository has no license, so all rights stay with borisnimcevic. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32c3 boilerplate without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k