28 open source boards using the ESP32-C3FH4
Real designs built with the ESP32-C3FH4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Spark-Analyzer
tooyipjee
46.5 × 40 mm67 parts4LMIT168ESP32
Auckland-LED-Train-Map
CDFER
249 × 70 mm239 parts2LGPL-3.068ESP32
Batch 1
CDFER
93 × 173 mm384 parts2LCustom license8ESP32
Finland live train map
HekiNav
110 × 220 mm326 parts2LMIT7ESP32
Wellington-Live-Train-Map
CDFER
96 × 211 mm225 parts2LGPL-3.06ESP32
Helsinki live train map
HekiNav
249 × 71.5 mm398 parts2LMIT3ESP32
OpenRX-Gemini
OpenDrone-hw
17 × 15.7 mm85 parts6LCERN-OHL-S-2.03ESP32
Pocket 2.66 E-reader
quintenluyten2
45 × 29.2 mm70 parts4LNo license3ESP32
Openrz67-trigger
openrz67
48 × 22 mm59 parts2LMIT3ESP32
Nul
Choccy-vr
11 × 43.2 mm30 parts4LNo license3ESP32
Chronos phantom
jayis1
65 × 30 mm26 parts4LNo license3ESP32
OpenRX-Mono
OpenDrone-hw
10 × 17.3 mm61 parts6LCERN-OHL-S-2.02ESP32
OpenRZ67 camera trigger
mhellevang
48 × 22 mm59 parts2LMIT2ESP32
OpenRX-Lite
OpenDrone-hw
10 × 11.5 mm47 parts6LCERN-OHL-S-2.02ESP32
ESP32-IoT-Board
ollieelliot
23.9 × 27.2 mm50 parts4LNo license1ESP32
OpenRX-Lite-UFL
OpenDrone-hw
10 × 11.5 mm47 parts6LCERN-OHL-S-2.01ESP32
ConeRGB2
ConnorRigby
78.5 × 95 mm152 parts4LApache-2.00RP2040/RP2350
Mcu coin
Niich
97 × 62 mm112 parts2LNo license0ESP32
YMC-Mathpad
mbayrao
92 × 78 mm73 parts4LNo license0ESP32
Arctrack
leeeeeeeeeeeeee2
40 × 60.5 mm55 parts4LGPL-3.00ESP32
Esp32-dongle v0-1-ceramic antenna
manhoosbilli1
11 × 50.8 mm47 parts4LNo license0ESP32
SHAKE FOB REV-A
rohith-scandron
20.6 × 28.9 mm47 parts2LNo license0ESP32
Nano24-elrs receiver
aprskalo1
13 × 11.1 mm41 parts6LCERN-OHL-S-2.00ESP32
Tasgdo
nrwiersma
22 × 22.2 mm40 parts4LMIT0ESP32
Esp32c3 boilerplate
borisnimcevic
63.5 × 33 mm27 parts2LNo license0ESP32
WLED Matrix
CDFER
93 × 32 mm135 parts2LCustom license8ESP32
Integrated circuits
LilyTronics
70 × 79 mm35 parts2LGPL-3.02ESP32
Radianite-MicroNeo2
RadianiteComputers
50 × 33 mm70 parts4LNo license0
How designs wire the ESP32-C3FH4
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the ESP32-C3FH4 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD3P3 pins have a capacitor to GND on 24 of 25 designs, most often 100 nF (then 1 µF).
- The VDD3P3_RTC pin has a decoupling capacitor on 24 of 25 designs, most often 100 nF (then 1 µF).
- The XTAL_N pin has a capacitor to GND on 24 of 25 designs, most often 15 pF (then 27 pF).
- The LNA_IN pin has a capacitor to GND on 23 of 25 designs, most often 1.5 pF (then 1.2 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LNA_INpin 1 | Connected to: Signal 100% |
|
| VDD3P3pin 2, 3 | Connected to: Signal 52% · 3.3V 48% |
|
| GPIO2pin 6 | Connected to: Signal 100% |
|
| CHIP_ENpin 7 | Connected to: A connector 28% |
|
| VDD3P3_RTCpin 11 | Connected to: 3.3V 96% |
|
| GPIO8pin 14 | Connected to: Signal 96% |
|
| GPIO9pin 15 | Connected to: A connector 28% |
|
| VDD3P3_CPUpin 17 | Connected to: 3.3V 96% |
|
| VDD_SPIpin 18 | Connected to: 3.3V 56% · not connected 28% · a signal 16% |
|
| SPIHDpin 19 | Connected to: Not connected 96% | — |
| SPIWPpin 20 | Connected to: Not connected 96% | — |
| SPICS0pin 21 | Connected to: Not connected 88% | — |
| SPICLKpin 22 | Connected to: Not connected 88% | — |
| SPIDpin 23 | Connected to: Not connected 92% | — |
| SPIQpin 24 | Connected to: Not connected 92% | — |
| GPIO18pin 25 | Connected to: A connector 20% · not connected 20% |
|
| GPIO19pin 26 | Connected to: A connector 21% · not connected 17% |
|
| XTAL_Npin 29 | Connected to: Signal 100% |
|
| XTAL_Ppin 30 | Connected to: Signal 100% |
|
| VDDApin 31, 32 | Connected to: 3.3V 96% |
|
| GNDpin 33 | Connected to: GND 100% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spark-Analyzer by tooyipjee, Auckland-LED-Train-Map by CDFER, Batch 1 by CDFER and Finland live train map by HekiNav.
The ESP32-C3FH4 in open source designs
The gallery holds 28 open source boards using the ESP32-C3FH4 from 27 GitHub repositories; a typical one measures about 48 × 33 mm and carries around 60 components.
57% use four copper layers or more, and 57% carry an open source license.
The most starred is Spark-Analyzer by tooyipjee.
Parts used alongside the ESP32-C3FH4
Microcontrollers on boards using the ESP32-C3FH4
What boards using the ESP32-C3FH4 are built for
ESP32-C3FH4: common questions
Where can I find a ESP32-C3FH4 reference design?
Each of the 28 boards on this page is a real design using the ESP32-C3FH4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3FH4 VDD3P3 pin connected?
The VDD3P3 pins have a capacitor to GND on 24 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the ESP32-C3FH4.
What decoupling capacitors do designs use on the ESP32-C3FH4 VDD3P3_RTC pin?
The VDD3P3_RTC pin has a decoupling capacitor on 24 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the ESP32-C3FH4.
How is the ESP32-C3FH4 XTAL_N pin connected?
The XTAL_N pin has a capacitor to GND on 24 of 25 designs, most often 15 pF (then 27 pF). Counted from the KiCad layouts of 25 open source designs using the ESP32-C3FH4.
What parts are used alongside the ESP32-C3FH4?
The TLV75533PDQNR, SX1281IMLTRT, XC6206P332MR, BQ25185DLHR and C157925 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3FH4 use?
Most are built on ESP32 (27) and RP2040/RP2350 (1).
How big is a typical board using the ESP32-C3FH4?
The median is 48 × 33 mm, and 43% are two-layer designs.
What is the most popular open source board using the ESP32-C3FH4?
By GitHub stars, Spark-Analyzer by tooyipjee, with 168 stars.
Can I simulate one of these boards using the ESP32-C3FH4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.