14 open source boards using the ADUM4160

Real designs built with the ADUM4160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the ADUM4160

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the ADUM4160 connects to, and the resistors, capacitors and other passives placed on it.

  • The UD- pin has a series resistor on 13 of 13 designs, most often 24 Ω (then 22 Ω).
  • The UD+ pin has a series resistor on 13 of 13 designs, most often 24 Ω (then 22 Ω).
  • The VBUS1 pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF).
  • The VDD1 pin has a capacitor to GND on 12 of 13 designs, most often 100 nF (then 1 µF).
VBUS1pin 1Connected to: VBUS 69% · a signal 31%
  • Decoupling capacitor on 92% · 100 nF (11), 1 µF (5)
GND1pin 2, 8Connected to: GND 92%
VDD1pin 3Connected to: Signal 62% · VDD1 38%
  • Capacitor to GND on 92% · 100 nF (11), 1 µF (1)
PDENpin 4Connected to: Signal 62% · VDD1 38%
  • Capacitor to GND on 85% · 100 nF (10), 1 µF (1)
SPUpin 5Connected to: Signal 54% · VDD1 46%
  • Capacitor to GND on 77% · 100 nF (9), 1 µF (1)
UD-pin 6Connected to: Signal 100%
  • Series resistor on 100% · 24 Ω (7), 22 Ω (3), 100 Ω (1)
UD+pin 7Connected to: Signal 100%
  • Series resistor on 100% · 24 Ω (7), 22 Ω (3), 100 Ω (1)
GND2pin 9, 15Connected to: GND 100%
DD+pin 10Connected to: Signal 100%
  • Series resistor on 85% · 24 Ω (7), 22 Ω (3), 100 Ω (1)
DD-pin 11Connected to: Signal 100%
  • Series resistor on 85% · 24 Ω (7), 22 Ω (3), 100 Ω (1)
PINpin 12Connected to: 3.3V 69% · a signal 31%
SPDpin 13Connected to: 3.3V 69% · a signal 31%
VDD2pin 14Connected to: 3.3V 69% · a signal 31%
  • Decoupling capacitor on 92% · 100 nF (18), 1 µF (2), 22 µF (1)
VBUS2pin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 92% · 100 nF (18), 22 µF (2), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RailLink by Misaka0x2730, Remram by hasenbanck, STM32F rev3 by Churrosoft and Aislador USB para uso industrial by brengi.

The ADUM4160 in open source designs

The gallery holds 14 open source boards using the ADUM4160 from 14 GitHub repositories; a typical one measures about 80 × 75 mm and carries around 184 components.

64% use four copper layers or more, and 50% carry an open source license.

The most starred is Fx3u 24mr by eddyem.

Microcontrollers on boards using the ADUM4160

ADUM4160: common questions

Where can I find a ADUM4160 reference design?

Each of the 14 boards on this page is a real design using the ADUM4160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the ADUM4160 UD- pin?

The UD- pin has a series resistor on 13 of 13 designs, most often 24 Ω (then 22 Ω). Counted from the KiCad layouts of 13 open source designs using the ADUM4160.

What resistor goes on the ADUM4160 UD+ pin?

The UD+ pin has a series resistor on 13 of 13 designs, most often 24 Ω (then 22 Ω). Counted from the KiCad layouts of 13 open source designs using the ADUM4160.

What decoupling capacitors do designs use on the ADUM4160 VBUS1 pin?

The VBUS1 pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the ADUM4160.

What parts are used alongside the ADUM4160?

The W25Q16JVUXIQ, RP2040, RT6150B-33GQW, TPD2EUSB30 and 74LVCH2T45DC appear in the most repositories here.

Which microcontrollers do boards using the ADUM4160 use?

Most are built on STM32 (7), RP2040/RP2350 (5) and Nordic nRF (1).

How big is a typical board using the ADUM4160?

The median is 80 × 75 mm, and 36% are two-layer designs.

What is the most popular open source board using the ADUM4160?

By GitHub stars, Fx3u 24mr by eddyem, with 208 stars.

Can I simulate one of these boards using the ADUM4160 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part