QX-10/16 WD1002 Host Interface
About the QX-10/16 WD1002 Host Interface PCB
QX-10/16 WD1002 Host Interface is an open source PCB design by brijohn, published on GitHub. It is a 2-layer board measuring 281 × 79 mm, with 26 components from 20 distinct parts.
Other key parts include the 74LS245, 74LS541, 74LS125 and 74LS00. By type, the board carries 8 capacitors, 6 resistors, 5 ICs, 4 connectors, 2 test points and 1 transistor.
From the project
Epson QX-10 Files
Main components on the QX-10/16 WD1002 Host Interface
QX-10/16 WD1002 Host Interface bill of materials (BOM)
26 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS245 74LS244 SN74LS245N | DIP-20_W7.62mm_LongPads | U1 |
| 1 | 74LS541 74LS30 SN74LS541N | DIP-14_W7.62mm_LongPads | U2 |
| 1 | 74LS541 74LS245 SN74LS541N | DIP-20_W7.62mm_LongPads | U3 |
| 1 | 74LS125 74LS14 SN74LS125AN | DIP-14_W7.62mm_LongPads | U4 |
| 1 | 74LS00 LM339 SN74LS00N | DIP-14_W7.62mm_LongPads | U5 |
| 1 | Q_NPN_CBE | TO-92_Inline | Q1 |
| 1 | Edge Connector | BUS_QX10 | CN1 |
| 1 | JUMPER_3_OPEN Host Interface 68001-103HLF | PinHeader_2x20_P2.54mm_Horizontal | J1 |
| 1 | JUMPER_3_OPEN PWR 68001-103HLF | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 609-3271 Signal Test 68001-104HLF | PinHeader_1x20_P2.54mm_Vertical | J3 |
| 1 | INT | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | DRQ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | 4.7uf | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 7 | .1uf | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C2, C3, C4, C5, C6, C7, C8 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10K 4.7k MFR-25FRF52-10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
QX-10/16 WD1002 Host Interface design files
The KiCad project lives in the brijohn/qx10 repository on GitHub; these links point at the commit this page was built from.
QX-10/16 WD1002 Host Interface: common questions
How big is the QX-10/16 WD1002 Host Interface PCB?
The QX-10/16 WD1002 Host Interface measures 281 × 79 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QX-10/16 WD1002 Host Interface?
26 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the QX-10/16 WD1002 Host Interface design files?
From the brijohn/qx10 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the QX-10/16 WD1002 Host Interface design in my own project?
The repository has no license, so all rights stay with brijohn. Use it as a reference, and ask the author before reusing the design.
More boards in qx10
Qx10 titan clone
281 × 79 mm48 parts2LNo license9
AVR/ArduinoQ10MF BOARD
281 × 79 mm44 parts2LNo license9
AVR/ArduinoQX10 Titan QXPC Memory Board
254 × 63.5 mm40 parts2LNo license9
Qx10 sound card
281 × 79 mm32 parts2LNo license9
QX-10 1MB Memory Expansion Board
281 × 79 mm22 parts2LNo license9
Qx 10 cf adapter
281 × 79 mm20 parts2LNo license9
RP2040/RP2350Qx10 keyboard adapter
88.5 × 34 mm18 parts2LNo license9