Qx10 titan clone
About the Qx10 titan clone PCB
Qx10 titan clone is an open source PCB design by brijohn, published on GitHub. It is a 2-layer board measuring 281 × 79 mm, with 48 components from 19 distinct parts.
Other key parts include the 74LS245, AS6C4008-55PCN, 74LS75, 74LS373 and 28C64. By type, the board carries 22 capacitors, 20 ICs, 4 resistors, 1 crystal and 1 connector.
From the project
Epson QX-10 Files
Main components on the Qx10 titan clone
Qx10 titan clone bill of materials (BOM)
48 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS245 SN74LS245N | DIP-20_W7.62mm_Socket_LongPads | U1 |
| 1 | AS6C4008-55PCN AS6C4008-55PCN | DIP-32_W15.24mm_Socket_LongPads | U2 |
| 1 | 74LS75 SN74LS75N | DIP-16_W7.62mm_Socket_LongPads | U3 |
| 6 | 74LS373 SN74LS373N | DIP-20_W7.62mm_Socket_LongPads | U4, U5, U13, U14, U16, U17 |
| 1 | 28C64 AT28C64B-15PU | DIP-28_W15.24mm_Socket_LongPads | U6 |
| 1 | 74LS04 SN74LS04N | DIP-14_W7.62mm_Socket_LongPads | U7 |
| 1 | 74F08 SN74F08N | DIP-14_W7.62mm_Socket_LongPads | U8 |
| 1 | 74LS21 SN74LS21N | DIP-14_W7.62mm_Socket_LongPads | U9 |
| 2 | 74LS74 SN74LS74AN | DIP-14_W7.62mm_Socket_LongPads | U10, U11 |
| 1 | 74LS244 SN74LS244N | DIP-20_W7.62mm_Socket_LongPads | U12 |
| 2 | GAL16V8 ATF16V8B-15PU | DIP-20_W7.62mm_Socket_LongPads | U15, U19 |
| 1 | CP82C84 | DIP-18_W7.62mm_Socket_LongPads | U18 |
| 1 | 8088 | DIP-40_W15.24mm_Socket_LongPads | U20 |
| 1 | 695-HC49US-15-U 15 MHZ HC-49/U-S15000000ABJB | Crystal_HC49-U_Vertical | Y1 |
| 1 | Edge Connector | BUS_QX10 | CN1 |
| 20 | 0.1UF 0.1uf RDER72A104K1S1H03A | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +12 |
| 2 | 30PF 30pf C315C300F3G5TA | C_Disc_D5.0mm_W2.5mm_P2.50mm | C21, C22 |
| 3 | 220 CFR-25JR-52-220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | 4.7K 4.7k 4608X-AP1-472LF | R_Array_SIP8 | RN1 |
Qx10 titan clone design files
The KiCad project lives in the brijohn/qx10 repository on GitHub; these links point at the commit this page was built from.
Qx10 titan clone: common questions
How big is the Qx10 titan clone PCB?
The Qx10 titan clone measures 281 × 79 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Qx10 titan clone?
48 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Qx10 titan clone design files?
From the brijohn/qx10 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Qx10 titan clone design in my own project?
The repository has no license, so all rights stay with brijohn. Use it as a reference, and ask the author before reusing the design.
More boards in qx10
AVR/ArduinoQ10MF BOARD
281 × 79 mm44 parts2LNo license9
AVR/ArduinoQX10 Titan QXPC Memory Board
254 × 63.5 mm40 parts2LNo license9
Qx10 sound card
281 × 79 mm32 parts2LNo license9
QX-10/16 WD1002 Host Interface
281 × 79 mm26 parts2LNo license9
QX-10 1MB Memory Expansion Board
281 × 79 mm22 parts2LNo license9
Qx 10 cf adapter
281 × 79 mm20 parts2LNo license9
RP2040/RP2350Qx10 keyboard adapter
88.5 × 34 mm18 parts2LNo license9