34 open source boards using the 74LS541
Real designs built with the 74LS541, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT29Coleco original
sparkletron
168.4 × 214 mm218 parts2LMIT16Apollo 7 Squale
jfdelnero
450 × 160 mm219 parts2LNo license6A500-Blinkenlights-Expansion
kr239
58.4 × 125.7 mm68 parts4LNo license5SBC4040
ryomuk
190.5 × 127 mm145 parts2LMIT3Ns32k timewarp
drelectro
203.2 × 218.4 mm409 parts4LMIT1Intel 8088 Computer
oberrow
100 × 100 mm64 parts4LMIT1PIC
S100 B1FU
CatspersCoffee
254 × 134.1 mm164 partsCustom license0C64LED
rdoetjes
43.2 × 43.2 mm16 parts2LNo license17Coleco original main only
sparkletron
168.4 × 214 mm182 parts2LMIT16AVR/Arduino
Q10MF BOARD
brijohn
281 × 79 mm44 parts2LNo license9TD4tester
akita11
100 × 100 mm110 parts2LMIT1Alu
akashihi
100.3 × 100.3 mm33 parts4LNo license1SPI Unit
oberrow
96 × 70 mm29 parts4LMIT1Address register bank
lafehubert
114.3 × 90.3 mm99 parts4LNo license0128 X 16 RAM V4 FINAL
ibm2030
180 × 95 mm108 parts4LNo license13AVR/Arduino
QX10 Titan QXPC Memory Board
brijohn
254 × 63.5 mm40 parts2LNo license9The stack
akashihi
100.3 × 100.3 mm19 parts4LNo license1PIC
S10 PIC SPI v1
CatspersCoffee
254 × 134.1 mm163 partsCustom license0Qx10 sound card
brijohn
281 × 79 mm32 parts2LNo license9S100 Z80 V5
CatspersCoffee
254 × 134.6 mm138 partsCustom license0Transfer register board
lafehubert
99.5 × 49.7 mm40 parts2LNo license0QX-10/16 WD1002 Host Interface
brijohn
281 × 79 mm26 parts2LNo license9VideoBoard v1
roberto314
100 × 100 mm77 parts2LBSD-2-Clause0QX-10 1MB Memory Expansion Board
brijohn
281 × 79 mm22 parts2LNo license9Qx 10 cf adapter
brijohn
281 × 79 mm20 parts2LNo license9RP2040/RP2350
Qx10 keyboard adapter
brijohn
88.5 × 34 mm18 parts2LNo license9Interf u
circuitly
115.6 × 108.2 mm23 parts2LNo license0Parallell-Expansion
MicroLind-Developers
85.1 × 70.1 mm13 parts2LCERN-OHL-P-2.00RS 232
cherry-takuan
99.7 × 99.7 mm55 parts2LCC-BY-SA-4.045Interf u
claynicholson
115.6 × 108.2 mm23 parts2LMIT102IO board
cherry-takuan
99.7 × 99.7 mm36 parts2LCC-BY-SA-4.045Interf u
nickradfc
115.6 × 108.2 mm23 parts2LNo license0
How designs wire the 74LS541
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 74LS541 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 21 designs, most often 100 nF.
- The G2 pin is tied to GND on 13 of 21 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 95% | — |
| G2pin 19 | Connected to: GND 62% · a signal 38% | — |
| VCCpin 20 | Connected to: VCC 95% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Interf u by claynicholson, IO board by cherry-takuan, HEC-Model-Z1 by Andy18650 and Yddraig by ddraig68k.
The 74LS541 in open source designs
The gallery holds 34 open source boards using the 74LS541 from 21 GitHub repositories; a typical one measures about 142 × 100 mm and carries around 50 components.
68% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is Interf u by claynicholson.
Parts used alongside the 74LS541
Microcontrollers on boards using the 74LS541
What boards using the 74LS541 are built for
74LS541: common questions
Where can I find a 74LS541 reference design?
Each of the 34 boards on this page is a real design using the 74LS541. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS541 VCC pin?
The VCC pin has a decoupling capacitor on 11 of 21 designs, most often 100 nF. Counted from the KiCad layouts of 21 open source designs using the 74LS541.
How is the 74LS541 G2 pin connected?
The G2 pin is tied to GND on 13 of 21 designs (a signal on 8). Counted from the KiCad layouts of 21 open source designs using the 74LS541.
What parts are used alongside the 74LS541?
The 74LS04, 74LS245, 74LS00, 74LS08 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS541 use?
Most are built on AVR/Arduino (2), PIC (2) and RP2040/RP2350 (1).
How big is a typical board using the 74LS541?
The median is 142 × 100 mm, and 68% are two-layer designs.
What is the most popular open source board using the 74LS541?
By GitHub stars, Interf u by claynicholson, with 102 stars.
Can I simulate one of these boards using the 74LS541 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.